This screen enables you to set parameters by which the router
forwards data to its destination if your network has a static IP
address.
Network Address: Type the static IP address your network uses to access the Internet. Your ISP or network administrator provides you with this information.
Network Mask: Type the network (subnet) mask for your network. If you do not type a value here, the network mask
defaults to 255.255.255.255. Your ISP or network administrator provides you with this information.
Gateway Address: Type the gateway address for
your network. Your ISP or network administrator provides you with this information.
Interface: Select which interface, WAN or LAN,
you use to connect to the Internet.
Metric: Select which metric you want to
apply to this configuration.
Add: Click to add the configuration to the static IP
address table at the bottom of the page.
Update: Select one of the entries in the static IP
address table at the bottom of the page and, after changing
parameters, click Update to
confirm the changes.
Delete: Select one of the entries in the static IP
address table at the bottom of the page and click Delete to remove the entry.
Cancel: Click the Cancel button to erase all fields and enter new information.
back to top |