This screen enables you to set up remote management features.

Click the items below for more information.

• Remote Management

This screen enables you to set up remote management. Using remote management, the router can be configured through the WAN via a Web browser. A user name and password are required to perform remote management.

HTTP: Enables you to set up HTTP access for remote management.

• Enable: Click to enable or disable HTTP access for remote management.

• Remote IP Range: Type the range of IP addresses that can be used for remote access.

Allow to Ping WAN Port: Type a range of router IP addresses that can be pinged from remote locations.

UPNP Enable: UPnP is short for Universal Plug and Play which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. The Router is a UPnP enabled router and will only work with other UPnP devices/softwares. If you do not want to use the UPnP functionality, it can be disabled by selecting "Disabled".

PPTP: Enables users to set up PPTP connection between LAN and WAN ( pass-through).

L2TP: Enables users to set up L2TP connection between LAN and WAN ( pass-through).

IPSec: Enables users to set up IPSec connection between LAN and WAN ( pass-through).

Multicast Stream: Enables or Disables users to set up multicast stream. If you have a multimedia LAN application that is not receiving content as expected, try enabling this option. Default is enabled.

back to top