***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then version 2.10.010 or above afterwards.(Firmware is included in this download)*** *If it is the first time upgrading the switch from 1.00.010 to 2.10.010 or above, it is recommended to manually reset the device to factory default and clear web browser cache after the loading firmware file.*
The TPE-1620WSF supports IEEE 802.3af and 802.3at PoE standards. TRENDnet PoE switches typically support IEEE industry standards. Please check detailed product specifications under the Product section of our website. If your device is not IEEE PoE compliant it may not be compatible with TRENDnet Po...
Each switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TPE-1620WSF power budget is 370W....
A switch cannot share an IP address provided by your ISP with multiple devices. You will need a router to share your Internet service with multiple devices. The switch can be used to expand the amount of available ports on your network....
Only managed or web smart PoE switches will have reset instruction. Unmanaged PoE switches are not configurable and do not have settings to reset. Your switch will have a reset button. This button is typically recessed and located on the front or the back of the switch. You will need a small pin ...
You will find management login and default settings in the quick installation guide and user’s guide. Included with the switch is a hard copy of the quick installation guide. The user’s guide is available for download from our website under the Support section....
16 x Gigabit PoE+ ports
4 x Gigabit shared ports (RJ-45 or SFP)
LED Display mode button (toggles LED indicators to display link/activity or PoE only port status)