Search FAQs
Browse by Product
Browse TEG-S3160 (v1.0R) Questions
There are 7 questions found in this category:

  1. Which category of Ethernet cable should I use for 2.5GBASE-T performance?
    You will need to be running Cat-5e or higher cabling for 2.5GBASE-T.
  2. Why Windows is showing that my computer’s network connection is 1.0 Gbps instead of 2.5 Gbps?
    Please check your network adapter's specification and make sure that it supports 2.5 Gbps. Also, check if your network cable is Cat-5e or higher....
  3. Is there an uplink port on the TEG-S3160?
    All ports on the TEG-S3160 support Auto-MDIX. All ports can be used as an uplink port.
  4. Can I share my Internet connection through the switch?
    To share an Internet connection you will need a Router. The TEG-S3160 can be utilized to expand the available ports on your existing Router or network....
  5. Does the TEG-S3160 support jumbo frames?
    The TEG-S3160 supports jumbo frames up to 12KB.
  6. How do I configure the TEG-S3160?
    The TEG-S3160 is a non-manageable switch. It is not configurable.
  7. Why can I only get internet on one device with this switch?
    A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....