Search FAQs
Browse by Product
FAQ Home Page > KVM > Desktop > TK-407K
Browse TK-407K Questions
There are 13 questions found in this category:

  1. Can I switch channels on the KVM with hotkeys?
    You can switch KVM channels by pressing scroll lock + scroll lock or num lock + num lock within two seconds. The Hot key sequence denotes that you hit the individual key consecutively, one at a time, not simultaneously. To switch to a specific channel, use the push buttons on the KVM....
  2. Why are my mouse and keyboard not responding?
    The USB hub may be detected as an unknown device on your PC. Power cycle the KVM by disconnecting all sets of KVM cables at the KVM at the same time, then reconnect them. Make sure you provide ample time between switching channels to allow your PC to detect the hardware properly....
  3. What is the maximum resolution and refresh rate supported by the TK-407K?
    2048 x 1536 @ 60Hz
  4. Does the TK-407K include KVM cables?
    The TK-407K includes four sets of KVM cables. 2 sets: 1.2m (4 ft.) 2 sets: 1.8m (6 ft.) ...
  5. Can I use interface converters, docking stations, or other third party hardware between the KVM and my computer and console devices?
    TRENDnet does not recommend using any type of third party hardware between the KVM and your computers or the console hardware to minimize compatibility issues. Use direct, native, connections. The TK-407K is a VGA KVM and it is recommended to use VGA displays with a VGA video source....
  6. Can I use third party KVM cables with the KVM?
    TRENDnet cannot guarantee compatibility with third party KVM cables. If you encounter issues, verify that the KVM functions properly with the included KVM cables. ...
  7. What should I check if the KVM stopped responding?
    When switching you are essentially disconnecting your hardware from one computer and connecting it to the other. Please allow ample time for your PC to recognize and load the drivers for your console hardware. If your KVM is not responding please power cycle the KVM by disconnecting all the KVM cabl...
  8. What should I check if my keyboard, video or mouse doesn’t work?
    If you have any third party hardware between the KVM and your console devices or the computers, please remove them to rule out any interoperability issues. This would include any type of interface converter, hubs, extension cables or docking stations. If you are using third party cables please use t...
  9. Can I use hotkeys to switch between computers with a Linux operating system?
    Unfortunately the Linux operating system will not allow for hotkey functionality. Please use the physical buttons on the KVM to switch computers. ...
  10. Why does the KVM switch computers randomly when using VMware?
    This is caused by VMware quickly changing the keyboard's num lock and scroll lock state. This activates hot key switching. You can prevent this by ensuring the host computer and the VMware session are both set to the same num lock and scroll lock state. Running VMware in full screen mode should also...
  11. Is this KVM HDCP compliant?
    Unfortunately this KVM is not an HDCP compliant device.
  12. Is there an alternate hot key for non-Windows based computers?
    Yes, you can also initiate hot key functions using num lock + num lock.
  13. What is the maximum cable length for my KVM?
    Please refer to the following table. TK-205K Supported Cables* Included 4ft (1.2M) TK-208K Supported Cables* Included 4ft (1.2M) TK-408K Supported Cables* Included 6ft (1.8M) TK-200 Supported Cables* TK-C06, TK-C10 & TK-C15 6 Ft.(1.83m), ...