Step 1 Click on Server Device.

Step 2 Click on the Wireless button.

Step 3 Input the ESS-ID and channel of your wireless access point or Router. If you are using Encryption on your wireless network, you will be required to input the WEP key. For 64bit hex you will be required to input 10 hexadecimal characters (A-F & 1-9 only) and for 128bit WEP, you will be required to input 26 hexadecimal characters. If you are using ASCII you will be required to input 5 characters (any) for 64bit and 13 characters for 128bit encryption then click OK