Search FAQs
Browse by Product
FAQ Home Page > Powerline > Powerline Adapters > TPL-420E2K
Browse TPL-420E2K Questions
There are 5 questions found in this category:

  1. How many TPL-420E adapters can I use in a single network?
    You can have a total of 8 TPL-420E adapters on a single network. Troubleshooting Please reference the items below if you continue to experience difficulty with installing and using your Powerline adapters. Power-cycle the Powerline adapters by disconnecting them from their power outlets for ...
  2. What do the LED’s on the TPL-420E indicate?
  3. How do I change my default encryption key using the Powerline Utility?
    Plug in your TPL-420E adapters then connect your computer in to one of the devices. Open the utility and click PLC Network > Device Setup and change Private Network Name. Once you have changed the Private Network Name click Set Local Device. Repeat for additional adapters. ...
  4. How do I reset the TPL-420E?
    Push and hold the reset button for 1 second then release. ...
  5. I’m not getting a connection through the TPL-420E units. What should I do?
    Plug the TPL-420E directly into an outlet. Avoid connecting them to extension cables, power strips or surge protectors. The TPL-420E has built-in surge protection Reset the units and ensure they are configured with the same Network ID or use the sync button to connect them. It is not recommended ...