Search FAQs
Browse by Product
FAQ Home Page > Wireless > Access Points / AP Controllers > TEW-738APBO
Browse TEW-738APBO Questions
There are 7 questions found in this category:

  1. How do I reset the TEW-738APBO to factory default settings?
    Press and hold in the reset button for approximately 15 seconds while the power is on. The default values are as follows. IP Address: 192.168.10.100 Username: admin Password: admin SSID: TRENDnet7380_2.4GHz Encryption: none ...
  2. How do I log in to the TEW-738APBO and configure it?
    Log in to the TEW-738APBO by entering https://192.168.10.100 into the address line of your browser. The default Username and Password are both admin.  ...
  3. How do I setup a WDS link between 2 TEW-738APBO’s?
    Log in to the TEW-738APBO by entering https://192.168.10.100 into the address line of your browser. The default Username and Password are both admin.  Click System > Operation Mode and make sure that Operation Mode is set to WDS Mode then click Save & Reboot. Click Wireles...
  4. How do I secure my wireless network?
    Log in to the TEW-738APBO by entering https://192.168.10.100 into the address line of your browser. The default Username and Password are both admin.  Click on Wireless > Virtual AP and click VAP Edit on your profile.    Click the Security Type drop down menu and select th...
  5. Does the TEW-738APBO support SNMP technology?
    Yes, the TEW-738APBO supports SNMP v1, v2c and v3. Also supports SNMP Trap.
  6. What’s the maximum amount of entries for the MAC address filter?
    The TEW-738APBO supports up to 20 entries.
  7. Can I use an 802.3af PoE injector to power the TEW-738APBO?
    The TEW-738APBO is not an 802.3af compliant device. It uses a proprietary Power over Ethernet adapter. You must use the PoE injector that comes with the TEW-738APBO. ...