Search FAQs
Browse by Product
FAQ Home Page > Wireless > Routers > TEW-714TRU
Browse TEW-714TRU Questions
There are 7 questions found in this category:

  1. How do I create accounts to access my connected USB device?
    Log in to the router by entering https://192.168.10.1 or https://TEW-714TRU into the address line of your browser. For added security, the router is preconfigured with unique management and wireless passwords. The default settings are located on the plastic wrapping of TEW-714TRU and the label ...
  2. Once I have my external hard driver connected to the router how to I access it?
    Open you web browser and enter the default server name which is \\tew-714truor the routers router IP address \\routersIP You will be prompt for authentication. You can use any of the accounts you created or the default username and password which is located on the plastic wrapping on TEW-714TRU a...
  3. How do I configure my wireless settings, change my Wi-Fi key or turn off a wireless radio?
    Make sure the switch on the TEW-714TRU is in router mode and then plug it into a wall socket. Search for the default SSID and connect to it using the unique Wi-Fi key which is located on the plastic wrapping and the label on the back of the TEW-714TRU. Log in by entering https://192.168.10.1 or ...
  4. How do I log in to the TEW-714TRU in router mode and configure it?
    Make sure the switch on the TEW-714TRU is in router mode. Connect wirelessly to the TEW-714TRU. The default wireless settings are located on the plastic wrapping on the TEW-714TRU and the label located on the back of the unit. Log in by entering https://192.168.10.1 or https://TEW-714TRU into t...
  5. What are the default settings for the TEW-714TRU?
    For added security, the router is preconfigured with unique management and wireless passwords. The default settings are located on the plastic wrapping on the TEW-714TRU and the label located on the back of the unit. ...
  6. What does the LED indicator on the front of the TEW-714TRU represent?
    OFF - Powered off or LED system boot up Blinking red - System is not ready Blinking orange - Looking for Internet connection Blinking Green - WPS pairing in progress Solid Green - Internet connection established ...
  7. How do I reset the TEW-714TRU to default settings?
    The reset button is located on the bottom of the TEW-714TRU. Press and hold in the reset button for 2 seconds to reset your router to default settings. For added security, the router is preconfigured with unique management and wireless passwords. The default settings are located on the plastic wrapp...