Switch com Trilho DIN gerenciado camada 2 PoE+ Gigabit industrial endurecido de 6 portas
TI-PG541i (Version v2.6R)
- Invólucro metálico com classificação IP30 endurecido com suporte para trilho DIN integrado
- Faixa de temperatura de operação ampla - 40 a 70 °C (-40 a 158 °F)
- 4 portas Gigabit PoE+ (802.3at), 1 porta Gigabit e um slot Gigabit SFP
- Disponibilidade de potência total de 120 watts
- Gerenciamento remoto de nuvem com TRENDnet Hive (taxa adicional se aplica)
- Saída do relé de alarme e entradas de energia redundante duplas
- Gerenciamento CLI (Telnet), Web (HTTP), SNMP v1/2c
- Suporte para 802.1Q/VLAN baseada em MAC e espionagem IGMP
- Suporte para 802.1p/DSCP/Programação de fila (SP/WFQ/WRR) QoS
- Fonte de alimentação vendida separadamente (modelos: 48VDC3000/TI-S24048)
- Compatível com NDAA/TAA (somente EUA)
- Garantia vitalícia*

Firmware
NÃO atualize firmware em nenhum produto da TRENDnet utilizando conexão wireless Atualização de firmware sobre conexão wireless pode causar dano ao produto. Por favor execute a atualização de firmware somente com conexão cabeada. |
Firmware Version: 1.0.15.S0
Release Date: 04/2025
Release Note:
- Updated GUI
- Added Hive cloud management
Note: If upgrading to firmware 1.0.15.S0 or above from firmware 1.0.14.S0 or below, it is recommended to reset the device to factory default after upgrading. Firmware 1.0.15.S0 or above allows the device to be registered and managed through TRENDnet Hive cloud management.
Nome do arquivo: FW_TI-PG541i_v1(1.0.15.S0).zip
SHA-1 Checksum: C80F153506F86D7CFEB4484BE74A27FC0B7A2AEB
Data: 4/22/2025
Tamanho de arquivo: 11.13 MB
Ficha técnica
Nome do arquivo: EN_datasheet_TI-PG541i_(v2.6R).pdf
Data: 4/22/2025
Tamanho de arquivo: 922.58 KB
Nome do arquivo: FR_datasheet_TI-PG541i_(v2.6R).pdf
Data: 4/22/2025
Tamanho de arquivo: 860.29 KB
Nome do arquivo: GE_datasheet_TI-PG541i_(v2.6R).pdf
Data: 4/22/2025
Tamanho de arquivo: 934.40 KB
Nome do arquivo: PO_datasheet_TI-PG541i_(v2.6R).pdf
Data: 4/22/2025
Tamanho de arquivo: 907.46 KB
Nome do arquivo: SP_datasheet_TI-PG541i_(v2.6R).pdf
Data: 4/22/2025
Tamanho de arquivo: 836.58 KB
Nome do arquivo: IT_datasheet_TI-PG541i_(v2.6R).pdf
Data: 4/22/2025
Tamanho de arquivo: 1.01 MB
Guia de Instalação Rápida
Nome do arquivo: Industrial_PoE_L2_Managed_Switches_(V2).pdf
Data: 4/22/2025
Tamanho de arquivo: 16.51 MB
Imagem(ns) do Produto
Yes, if the primary power supply fails for any reason the secondary power supply will take over with the intention of increasing system reliability....
The switch housing is made to withstand many industrial environments and temperatures of 40 to 75 °C (-40 to 167 °F) ...
A power supply is not included. Many installations scenarios will have power readily available. If power is not available we do offer the TI-S24048 power supply....
The maximum PoE power budget is 120 Watts.
You will find management login and default settings in the quick installation guide and user's guide. Included with the switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
If the password has been lost for the TI-PG541i you will need to contact support services to reset the switch back to default settings....
A switch cannot share an IP address provided by your ISP with multiple devices. You will need a router to share your Internet service with multiple devices. The switch can be used to expand the amount of available ports on your network....
Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TI-PG541i power budget is 120 Watts total us...
You can find detailed product specifications on our website under the Products section. You can find a detailed dip switch legend under the product specifications and in the user's guide available for download from our website under the Support section....
TRENDnet PoE switches will support 802.3af, 802.3at or both. Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE switches. Many non-standard PoE devices use passive or propriet...
Hardened products are designed to withstand harsh industrial environments. Check the product specifications for IP ratings, extreme operating temperature ranges and power options....
Hardened PoE appliances will require 24 – 57 V DC. Hardened non-PoE appliances typically support 12 – 56 V DC. Always check detailed product specifications on our website under the Products section. The TI-PG541i has a power input of 48 – 57 V DC using the TI-S24048 power supply, sold separately....
The TI-PG541i power budget is 120 Watts total using the TI-S24048 power supply, sold separately. You can also supply power to hardened devices with existing electrical systems. Be sure to check detailed product specifications on our website under the Products section for exact power requirements....
Padrão |
|
---|---|
Interface do dispositivo |
|
Taxa de transferência de dados |
|
Desempenho |
|
Gestão |
|
Gerenciamento de nuvem Hive |
|
MIB |
|
Qualidade do serviço (QoS) |
|
VLAN |
|
Multicast |
|
Características especiais |
|
Alimentação |
|
Adaptador de energia opcional (48VDC3000 vendido separadamente) |
|
Adaptador de alimentação opcional (TU-S24048 vendido separadamente) |
|
PoE |
|
Cerco |
|
MTBF |
|
Temperatura de operação |
|
Umidade de operação |
|
Dimensões |
|
Peso |
|
Certificações |
|
Garantia |
CONTEÚDO DA EMBALAGEM |
|
Todas as referências à velocidade são apenas para fins comparativos. As especificações, tamanho e formato do produto estão sujeitos a alterações sem aviso prévio, e a aparência real do produto pode ser diferente da descrita aqui.