The IDE to SATA Converter (TU-IDES) allows you to connect IDE devices such as CD, DVD and hard disk drives to a Serial ATA port on your computer's motherboard. Without software installation required, simply connect power and data cables to IDE devices to SATA connector on your computer.
- Connect any IDE CD, DVD or hard drive device to an available Serial ATA port
- Use your current IDE device on new SATA motherboards
- Utilizes Serial ATA 1.0 and hot-pluggable technology
- Master/slave hard drive emulation supported
- Supports PIO mode 0~4 and Ultra DMA mode 0~7
- Supports ATAPI Packet command set, and 48-bit LBA addressing
- Supports additional ATA commands for serial ATA SCR access
- Power save mode built-in
- Serial ATA Built In Self Test (BIST) ready
- 2-year limited warranty
Hardware |
Standard | - ATA 33/66/100/133, SATA 1.0
|
Supported OS | - Any OS that supports ATA and SATA
|
Input | - 7-pin female SATA data connector
- 4-pin power connector
|
Output | - 40-pin IDE female connector to IDE device
|
Cables | - 1x SATA cable
- 1 x Y power cable
|
Power Consumption | |
Dimension | - 57 x 35 x 12mm (2.3 x 1.4 x 0.4 in.)
|
Weight | - Main: 15g (0.6oz.)
- With wires: 40g (1.4oz.)
|
Temperature | - -20°C to 60°C (-4°F to 140°F)
|
Humidity | - Max. 90% (non-condensing)
|
Certification | |
CONTEúDO DA EMBALAGEM |
- TU-IDES
- Quick Installation Guide
- SATA cable (25 cm/ 10 in.)
- Y power cable (10 cm/ 4 in.)
|
Todas as referências à velocidade são apenas para fins comparativos. As especificações, tamanho e formato do produto estão sujeitos a alterações sem aviso prévio, e a aparência real do produto pode ser diferente da descrita aqui.