Search FAQs
Browse by Product
Browse TK-205K Questions
There are 12 questions found in this category:

  1. Is this KVM HDCP compliant?
    Unfortunately this KVM is not an HDCP compliant device.
  2. What is the maximum cable length for my KVM?
    Please refer to the following table. TK-205K Supported Cables* Included 4ft (1.2M) TK-208K Supported Cables* Included 4ft (1.2M) TK-408K Supported Cables* Included 6ft (1.8M) TK-200 Supported Cables* TK-C06, TK-C10 & TK-C15 6 Ft.(1.83m), ...
  3. If the image on your monitor is not clear please check the following:
    Make sure that your video monitor cables are properly connected to the computer and to the KVM switch. Try lowering the refresh rate and resolution of your monitor. ...
  4. If your mouse is not responding, not detected or there is a mouse error check the following:
    Make sure that your mouse is properly connected to the computer and to the KVM switch. Check that your mouse is plugged into the PS/2 mouse port and not the PS/2 keyboard port. Connect your mouse to the computer directly to verify that it is working If you are having trouble with the ...
  5. If your keyboard is not responding, not detected, or you receive a keyboard error, please check the following:
    Make sure that your keyboard is properly connected to the computer and to the KVM switch. Check that your keyboard is plugged into the PS/2 keyboard port and not the PS/2 mouse port. Connect your keyboard to the computer directly to verify that it is working. ...
  6. What is the default password for the TK-801R, TK-802R, TK-1601R and TK-1602R?
    The default password is eight zeros, "00000000".
  7. How do I get my mouse to respond after switching from one computer to another?
    Press Scroll lock + Scroll Lock + End to reset the switch and it should start responding again. If it does not respond disconnect the mouse for approximately 10 seconds then reconnect it. If it's still not responding reboot the computer. This questions only needs to go under the TK-801R, TK-802...
  8. Can I turn off the ‘beep’ when switching from one computer to another?
    Unfortunately, you can not turn it off when switching from one PC to another. You can turn it off when operating in auto scan mode only. The command for this is Scroll lock + Scroll lock + B. ...
  9. What are the hotkey commands for the TRENDnet KVM switch?
    The User's Guide or Quick Install Guide has a complete list of hotkey commands. You can download the User's Guide and Quick installation guide here: https://www.TRENDnet.com/asp/download_manager/category.asp?iType=29 Hotkey convention: The hotkey notation denotes that you should hit the individua...
  10. What is the hotkey command to switch from one computer to another?
    Scroll lock + Scroll lock + Up or Down arrows. For a complete list of hotkey commands please consult the user's guide or Quick Install Guide. ...
  11. Does my KVM switch support DVI monitors?
    Only the TK-404KR and TK-204KR support DVI connections.
  12. What kinds of mice and keyboards are supported.
    On the TK-207K the console ports are USB and support standard USB mice and keyboards. All other TRENDnet KVM switches have PS/2 console ports and support standard PS/2 mice and keyboards. ...