skip to main content
Click to change country
Search FAQs
Browse by Product
FAQ Home Page > Wired > Adapters > TEG-10GECSFP V4
Browse TEG-10GECSFP V4 Questions
There are 6 questions found in this category:

  1. What operating systems are supported by my adapter?
    Operating system support is located in the product specifications. You can find detailed product specifications on our website under the Products section....
  2. Why am I connecting at lower speeds than what the adapter supports?
    The Switch, Router, or other network appliance you are connecting to must also support the same specifications to take full advantage of the adapters capabilities. For example, if you are connecting to a gigabit Ethernet Switch you will only connect at 1000Mbps. Connect the TEG-10GECSFP to a 10G cap...
  3. Where can I find detailed specifications for the adapter?
    You can find detailed product specifications on our website under the Products section.
  4. What speeds are supported with this adapter?
    The adapter is capable of speeds up to 10Gbps when connected to a 10Gbps SFP+ modules, and 10Gbps SFP+ port....
  5. What type of fiber cable should I be using for 10G?
    For 10G connections you will need to use OM3 fiber cables. Distance of the fiber cable is dependent on the SFP module it is connected to....
  6. What can I do if my PC does not recognize the adapter?
    If the adapter is not detected by the PC make sure that it is seated firmly and properly into a PCIe 3.0 x4 interface slot and try a different slot....