skip to main content
Click to change country
Search FAQs
Browse by Product
FAQ Home Page > KVM > Desktop > TK-207K (V3)
Browse TK-207K (V3) Questions
There are 15 questions found in this category:

  1. Does the TK-207K include KVM cables?
    The TK-207K includes two sets of KVM cables. 2 sets: 1.2m (4 ft.)...
  2. Can I use interface converters, docking stations, or other third party hardware between the KVM and my computer and console devices?
    TRENDnet does not recommend using any type of third party hardware between the KVM and your computers or the console hardware to minimize compatibility issues. Use direct, native, connections. The TK-207K is a VGA KVM and it is recommended to use VGA displays with a VGA video source....
  3. Can I use third party KVM cables with the KVM?
    TRENDnet cannot guarantee compatibility with third party KVM cables. If you encounter issues, verify that the KVM functions properly with the included KVM cables....
  4. What should I check if the KVM stopped responding?
    When Switching you are essentially disconnecting your hardware from one computer and connecting it to the other. Please allow ample time for your PC to recognize and load the drivers for your console hardware. If your KVM is not responding please power cycle the KVM by disconnecting all the KVM cabl...
  5. What should I check if my keyboard, video or mouse doesn’t work?
    If you have any third party hardware between the KVM and your console devices or the computers, please remove them to rule out any interoperability issues. This would include any type of interface converter, hubs, extension cables or docking stations. If you are using third party cables please use t...
  6. Can I use hotkeys to switch between computers with a Linux operating system?
    Unfortunately the Linux operating system will not allow for hotkey functionality. Please use the physical buttons on the KVM to Switch computers....
  7. Why does the KVM switch computers randomly when using VMware?
    This is caused by VMware quickly changing the keyboard's num lock and scroll lock state. This activates hot key Switching. You can prevent this by ensuring the host computer and the VMware session are both set to the same num lock and scroll lock state. Running VMware in full screen mode should also...
  8. Is this KVM HDCP compliant?
    Unfortunately this KVM is not an HDCP compliant device.
  9. Is there an alternate hot key for non-Windows based computers?
    Yes, you can also initiate hot key functions using num lock + num lock.
  10. What is the maximum cable length for my KVM?
    Please refer to the following table. TK-205K Supported Cables* Included 4ft (1.2M) TK-208K Supported Cables* Included 4ft (1.2M) TK-408K Supported Cables* Included 6ft (1.8M) TK-200 Supported Cables* TK-C06, TK-C10 & TK-C15 6 Ft.(1.83m), 10 Ft.(3.1m), 15 Ft.(4.5m) TK-400 Supported Cables* TK-C06, TK...
  11. How do I get my mouse to respond after switching from one computer to another?
    Press Scroll lock + Scroll Lock + End to reset the Switch and it should start responding again. If it does not respond disconnect the mouse for approximately 10 seconds then reconnect it. If it's still not responding reboot the computer....
  12. Can I turn off the ‘beep’ when switching from one computer to another?
    Unfortunately, you can not turn it off when Switching from one PC to another. You can turn it off when operating in auto scan mode only. The command for this is Scroll lock + Scroll lock + B....
  13. What are the hotkey commands for the TRENDnet KVM switch?
    The User's Guide or Quick Install Guide has a complete list of hotkey commands. You can download the User's Guide and Quick installation guide here: https://www.TRENDnet.com/asp/download_manager/category.asp?iType=29...
  14. What is the hotkey command to switch from one computer to another?
    Scroll lock + Scroll lock + Up or Down arrows. For a complete list of hotkey commands please consult the user's guide or Quick Install Guide....
  15. What kinds of mice and keyboards are supported.
    On the TK-207K the console ports are USB and support standard USB mice and keyboards. All other TRENDnet KVM Switches have PS/2 console ports and support standard PS/2 mice and keyboards....