Main
Wireless
Status
Routing
Access
- MAC Filters
- Inbound Filter
- Virtual Server
- Firewall & DMZ
- Port Forwarding
- Application Rules
- Internet Bandwidth Control
- Guest Zone
- Advanced Network
- Parental Control
Tools
Restart
This screen enables you to save your settings as a profile and load profiles for different circumstances. You can also load the factory default settings and run a setup wizard to configure the router and router interface.
- Save Settings to Local Hard Drive
- Click to save the current configuration as a profile that you can load when necessary.
- Load Settings From Local Hard Drive
- Click Browse and go to the location of a stored profile. Click Restore to load the profile's settings.
- Restore To Factory Default Settings
- Click to restore the default settings. All configuration changes you have made will be lost.
- Reboot The Device
- Click Reboot The Device to restart the system in the event that the system is not performing correctly.
- Clear
- If the device displays any other language other than English, click this button to change the router's language to English.
Firmware
- Firmware Information and Upgrade
- This screen enables you to keep the router firmware up to date.
- Follow these instructions:
- 1. Download the latest firmware from the TRENDnet Web site and save it to your disk.
- 2. Click Browse and go to the location of the downloaded firmware file.
- 3. Select the file and click Upload to update the firmware to the latest release.
- Upgrading the firmware will not change any of your system settings but it is recommended that you save your system settings before doing a firmware upgrade. Please check the TRENDnet support site for firmware updates.
Ping Test
- Ping Test
- The ping test enables you to determine whether an IP address or host is present on the Internet or not. Enter the host name or IP address in the text box and click Ping.
Email Settings
- Email Settings
- You may want to make the email settings similar to those of your email client program.
Syslog
This section allows you to archive your log files to a Syslog Server.
- Enable Logging to Syslog Server
- Enable this option if you have a Syslog server currently running on the LAN and wish to send log messages to it.
- Syslog Server IP Address
- Enter the LAN IP address of the Syslog Server.
Schedules
This page is used to configure global schedules for the router. Once defined, these schedules can later be applied to the features of the router that support scheduling.
- Name
- The name of the schedule being defined.
- Day(s)
- Select a day or a range of days. Alternatively, tick the All Week checkbox to have this schedule apply to every day of the week.
- All Day - 24 Hours
- Check this box to have the schedule active the entire 24 hours on the days specified.
- Start Time
- Select the activation time of the schedule.
- End Time
- Select the deactivation time of the schedule.
- Schedule Rules List
- This displays all the schedules that have been defined.