5GHz2 / WPS Setting
This section allows you to activate WPS (Wi-Fi Protected Setup) which allows you to easily connect WPS capable wireless client devices to your access point. The access point offers two ways to connect wireless client devices using WPS: Virtual Push Button (PBC), or PIN. WPS cannot be used if the SSID Broadcast function is disabled.
WPS Config
WPS | |
WPS External Registrar Lock | |
WPS Summary
WPS Current Status | Idle |
WPS Configured | Yes |
WPS SSID | SSID5G2_4752 |
WPS Security Mode | WPA2-PSK AES |
WPS Key | 82661012345 |
AP PIN | 12345670 |
WPS Action
If you are using the Virtual Push Button method, click Start Push Button, then push and activate WPS on your wireless client device. If you are using the PIN method, enter the wireless client device PIN in the field and click Start PIN, then activate the WPS PIN method on your wireless client device. | |
PIN | |
PBC |