WAN

Internet Connection Settings

Use this section to configure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE, PPTP, L2TP, and BigPond. If you are unsure of your connection method, please contact your Internet Service Provider.

Note: If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers.

Modes

Choose the mode to be used by the router to connect to the Internet.

WAN Mode :

Static DHCP PPPoE PPTP L2TP

Static WAN Mode

Enter the static address information provided by your Internet Service Provider (ISP).

IP Address :
Subnet Mask :
Default Gateway :

DHCP WAN Mode

Host Name :

Enable Bigpond

Enable BigPond :

Bigpond Settings

BigPond Server :
BigPond User Id :
BigPond Password :
Verify Password :

PPPoE WAN Mode

Enter the information provided by your Internet Service Provider (ISP).

Username :
Password :
Verify Password :
Service Name :	(optional)
Reconnect Mode :	Always on On demand Manual
Maximum Idle Time :	(minutes, 0=infinite)

PPTP WAN Mode

Enter the information provided by your Internet Service Provider (ISP).

PPTP IP Address :
PPTP Subnet Mask :
PPTP Gateway IP Address :
PPTP Server IP Address :
Username :
Password :
Verify Password :
Reconnect Mode :	Always on On demand Manual
Maximum Idle Time :	(minutes, 0=infinite)

L2TP WAN Mode

Enter the information provided by your Internet Service Provider (ISP).

L2TP IP Address :
L2TP Subnet Mask :
L2TP Gateway IP Address :
L2TP Server IP Address :
Username :
Password :
Verify Password :
Reconnect Mode :	Always on On demand Manual
Maximum Idle Time :	(minutes, 0=infinite)

DNS And Advanced Settings

Use these DNS Servers :
Primary DNS Server :
Secondary DNS Server :

Use the default MTU :
MTU :	(bytes)
WAN Port Speed :
Respond to WAN Ping :
WAN Ping Inbound Filter :
MAC Cloning Enabled :
MAC Address :