What should I check if the KVM stopped responding?

Answer: When Switching you are essentially disconnecting your hardware from one computer and connecting it to the other. Please allow ample time for your PC to recognize and load the drivers for your console hardware. If your KVM is not responding please power cycle the KVM by disconnecting all the KVM cables simultaneously and then reconnect them.

FAQ ID: 3250
Created: 10/31/2016
Modified: 10/31/2016
No attachments were found.

Print this page
Email this to a friend

Was this answer helpful:
(1 = not helpful at all, 5 = very helpful)
1 2 3 4 5