If your mouse is not responding, not detected or there is a mouse error check the following:
FAQ ID: 814 Updated: 3/13/2006 2:50:45 PM
- Make sure that your mouse is properly connected to the computer and to
the KVM Switch. Check that your mouse is plugged into the PS/2 mouse port
and not the PS/2 keyboard port.
- Connect your mouse to the computer directly
to verify that it is working
- If you are having trouble with the mouse
movement, try resetting the Switch by pressing Scroll Lock + Scroll Lock
+ End.
- Make sure that you do not move the mouse or press any mouse buttons
when Switching from one PC to another.
- Try resetting the mouse by unplugging
it from the KVM for approximately 5 seconds and reconnect it.