Step 1 Open your web browser and type the IP address of the TV- IP201 (w) in the address bar. The default IP address is 192.168.0.30.

Step 2 Click on "System Administration".

Step 3 Click on "Network" on the left hand side of the screen.
Step 4 Input the ESS-ID, Channel and if you have Encryption setup on our network, you will need to input that information as well, the click "Save". Note: All information has to match that of your wireless Router or access point.
Step 5 After saving the information, unplug the Ethernet cable from the back of the camera, next, unplug the power from the back of the camera for 10 seconds.
Step 6 Plug the power back into the camera and wait for 30 seconds.
Step 7 Open your web browser and type the IP address of the TV- IP201 (w) in the address bar. The default IP address is 192.168.0.30.