skip to main content
TRENDnet Store
Click to change country

10G PCIe Network Adapter

TEG-10GECTX   (Version V5)

   Select Another Version
  • Converts a PCIe 3.0 x4 slot into a 10G Ethernet port
  • Supports connection speeds of 10Gbps, 2.5Gbps, and 1Gbps
  • Supports 802.1Q VLAN Tagging
  • Includes standard and low-profile brackets
  • Windows® and Windows Server® support
  • IEEE 802.3an and 802.3bz compliant
What operating systems are supported by my adapter?
Operating system support is located in the product specifications. You can find detailed product specifications on our website under the Products section. ...
Why am I connecting at lower speeds than what the adapter supports?
The switch, router, or other network appliance you are connecting to must also support the same specifications to take full advantage of the adapters capabilities. For example, if you are connecting to a fast Ethernet switch you will only connect at 100Mbps and if you connect to a gigabit switch you...
Where can I find detailed specifications for the adapter?
You can find detailed product specifications on our website under the Products section.
What speeds are supported with this adapter?
The adapter is capable of speeds up to 10Gbps when connected to a 10Gbps device using Cat6a or higher Ethernet cables....
What type of Ethernet cable should I be using for 10G?
For 10G connections up to 100 meters (328 ft.) you will need to use Category 6a cables. You can use Category 6 cables for distances up to 55 meters (180 ft.)...
What can I do if my PC does not recognize the adapter?
If the adapter is not detected by the PC make sure that it is seated firmly and properly into a PCIe 3.0 x4 interface slot and try a different slot....
What can I check if Wake-on-LAN is not working?
Confirm that the link light is on when the system is powered off. If there is no link light, then there is no way for the TEG-10GECTX to receive the magic packet to wake the system. Check your BIOS settings to ensure WoL is enabled. Make sure the PC you are sending the magic packet from can ...
Standards
  • IEEE 802.3ab
  • IEEE 802.3bz 2.5GBASE-T
  • IEEE 802.3an 10GBASE-T
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1ad
  • IEEE 802.3x
  • IEEE 802.3az
Hardware Interface
  • PCIe Gen 3 x4 interface
  • 1 x 10Gbps RJ-45 Ethernet port (Supported Speeds: 10Gbps/2.5Gbps/1Gbps )
  • LED indicators
Cable Requirements
  • 10GBASE-T (10Gbps): Cat6 twisted pair @ 55m / 180 ft. (max.) / Cat6A twisted pair @ 100m / 328 ft. (max.)
  • 2.5GBASE-T (2.5Gbps): Cat5e twisted pair @ 100m / 328 ft. (max.)
  • 1000BASE-T (1Gbps): Cat5e twisted pair @ 100m / 328 ft. (max.)
Compatibility
  • Windows® 11, 10
  • Windows® Server 2025, 2022, 2019, 2016
Jumbo Frames
  • Up to 16KB
Additional Support
  • 802.1Q VLAN Tagging
  • Receive-side scaling (RSS)
  • Supports protocol offload (ARP & NS)
  • Message Signaled Interrupts (MSI)
  • Latency Tolerance Reporting (LTR)
  • IP, TCP, and UDP checksum offloading
  • Supports Wake-On-LAN
  • Supports Link Aggregation
Power
  • Max. consumption: 2.5W
Operating Temperature
  • 0⁰– 40⁰ C (32⁰ – 104⁰ F)
Operating Humidity
  • Max. 90% non-condensing
Certifications
  • CE
  • FCC
Dimensions
  • 120 x 88 x 22mm (4.7 x 3.5 x 0.86 in.)
Weight
  • 52g (2.6 oz.)
Warranty
  • 3 year

PACKAGE CONTENTS
  • TEG-10GECTX
  • Standard & low-profile brackets

*Maximum distance of Cat6 and Cat6a cabling are references to IEEE 802.3an standard. Actual data throughput and distance will vary depending on the quality of the cable.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.