195 x 118 x 61mm (7.6 x 4.6 x 2.4 in.) per access point
304g (10.7 oz.) per access point
2 x TEW-740APBO
Quick Installation Guide
Proprietary/Passive PoE injectors
Power adapters (12V DC, 1A)
2 X Rubber seals
* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally, environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
** For optimal PoE distance from the PoE injector to the wireless access point, it is recommended to use a Cat 5e or better solid wire cable and connect the injector’s power supply directly to a power outlet. Avoid using a power strip or surge protector.
Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice.