skip to main content

10/100Mbps Fast Ethernet PCI Adapter

TE100-PCIWplus   (Version 1.0)

DISCONTINUED PRODUCT

The TE100-PCIWplus (Version 1.0) has been discontinued. It has been replaced by the TEG-10GECTX (Version v3.0R). For a list of discontinued products, click here.

Drivers

Filename: Driver_TE100PCIWplus.zip
SHA-1 Checksum: DAC1690B3166E3C430B1199245EE22B6D1350066
Date: 7/25/2017
File Size: 502.75 KB

Datasheet

Filename: Spec_TE100-PCIWplus.pdf
Date: 5/2/2013
File Size: 217.71 KB
Hardware
Standards:
  • IEEE 802.3 10Base-T, IEEE 802.3µ 100Base-TX
Data Bus Width:
  • 32-bit bus mastering PCI
Data Transfer Rate:
  • 10/100Mbps (20/200Mbps in full-duplex mode)
Protocol:
  • CSMA/CD
Connectors:
  • 1 RJ-45 (10Mbps or 100Mbps speed)
Diagnostic LED's:
  • LNK (Green) Green light will light when a good link is established
  • 100 (Green) LED will light when a good 100Mbps connection is established.
  • Green LED will be unlit when a good 10Mbps connection is detected.
Network Drivers:
  • Novell ODI, NDIS, SCO UNIX , MS LAN Manager , Windows NT/95/98, Windows for Workgroups and Packet Driver
Temperature:
  • Operating: 0° to 50° C ( 32° -122° F)
  • Storage: -20° to 80° C ( -4° to 176° F)
Humidity:
  • Operating: 10 to 90% (non-condensing)
  • Storage: 10 to 90% (non-condensing)
Certifications:
  • FCC Class B, CE

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.