RB-TC-NT2
RB-TC-NT2
RB-TC-NT2
RB-TC-NT2

Network Cable Tester (Certified Refurbished)

RB-TC-NT2   (Version v1.1R)

  • Comprehensive cable tester for network professionals
  • Tests Ethernet, USB, and BNC cables
  • Accurately test pin configurations for cable lengths up to 300 meters (984 ft.)
  • Identifies severed, short circuit, and cross connected pins
  • Continuous scan and manual scan modes
  • Includes BNC to Ethernet converters
  • Handy travel case
Test Pin Configuration
  • 10/100/1000 Base-T, 10 Base-2 (Coax)
  • RJ-11/RJ-12/RJ-45
  • EIA/TIA-356A/568A/568B
  • Token ring cables
Compatible Cables*
  • Cat 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e
  • Coax cable
  • USB and 1394 cable (with TC-NTUF)
Transmitter Unit Interface
  • 2 x test ports
  • Manual test button
  • Auto test button
  • Power/tone switch
  • LED indicators
Receiver Unit Interface
  • Test port
  • LED indicators
Tone Frequency
  • 600 - 800 Hz
Special Features
  • Test grounding of shielded (screened) cable
  • Identifies proper, severed, short circuit, and cross connected pins
  • Build-in tone generator for tracing cable with standard Tone Probe (TC-TP1)
  • Test USB and IEEE 1394 cables with optional adapters (TC-NTUF not included)
Power Source
  • Transmitter: 9 V DC battery (not included)
  • Receiver: powered by master transmitter via connected cable
Operating Temperature
  • 0 - 50°C (32 - 122°F)
Operating Humidity
  • Max. 95% non-condensing
Certifications
  • CE
Dimensions
  • Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 in.)
  • Receiver: 117 x 32 x 27 mm (4.6 x 1.3 x 1.1 in.)
Weight
  • Transmitter: 108 g (3.8 oz.)
  • Receiver: 44 g (1.6 oz.)
Warranty
  • 90 days limited
PACKAGE CONTENTS
  • TC-NT2
  • Quick Installation Guide
  • 2x RJ-45-to-BNC adapter
  • Network patch cable
  • Carry pouch

*Not designed for live wires. Connecting tester to a live wire may damage the tester.

Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice.