skip to main content
Click to change country

10-Port Industrial Gigabit L2 Managed DIN-Rail Switch

TI-G102i   (Version v1.6R)

   Select Another Version
  • 8 x Gigabit ports
  • 2 x SFP slots
  • Supports 100/1000Base-FX fiber SFP modules
  • Remote cloud management with TRENDnet Hive (Additional fee applies)
  • 20Gbps switching capacity
  • Hardened IP30 rated metal housing
  • Includes DIN-rail mounting bracket
  • Wide operating temperature range of -40° – 75° C (-40° – 167° F)
  • Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
  • IEEE 802.1p QoS with queue scheduling support
  • Bandwidth control per port
  • Redundant power inputs with overload current protection
  • Alarm output triggered by power failure
  • Supports Ethernet Ring Protection Switching (ERPSv2)
  • Power supply sold separately (model: TI-M6024)
  • NDAA / TAA compliant (U.S. only)
NDAA/TAA Compliant

Firmware

Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only


Firmware Version: 1.0.12.S0
Release Date: 4/2025
Release Note:

  • Updated GUI
  • Added Hive cloud management

Note: If upgrading to firmware 1.0.12.S0 or above from firmware 1.0.11.S0 or below, it is recommended to reset the device to factory default after upgrading. Firmware 1.0.12.S0 or above allows the device to be registered and managed through TRENDnet Hive cloud management.


Filename: FW_TI-G102i_v1(1.0.12.S0).zip
SHA-1 Checksum: 0E8B51B952849E45BC81C790C342C6DFD94D9278
Date: 4/3/2025
File Size: 11.06 MB
Download

Datasheet

Datasheet (English)
Filename: EN_datasheet_TI-G102i_(v1.6R).pdf
Date: 4/3/2025
File Size: 1.49 MB
Download Email
Datasheet (Français)
Filename: FR_datasheet_TI-G102i_(v1.6R).pdf
Date: 4/3/2025
File Size: 2.03 MB
Download Email
Datasheet (Deutsch)
Filename: GE_datasheet_TI-G102i_(v1.6R).pdf
Date: 4/3/2025
File Size: 2.57 MB
Download Email
Datasheet (Português)
Filename: PO_datasheet_TI-G102i_(v1.6R).pdf
Date: 4/3/2025
File Size: 1.02 MB
Download Email
Datasheet (Español)
Filename: SP_datasheet_TI-G102i_(v1.6R).pdf
Date: 4/3/2025
File Size: 1.36 MB
Download Email
Datasheet (Russian)
Filename: RU_datasheet_TI-G102i_(v1.6R).pdf
Date: 4/3/2025
File Size: 1.07 MB
Download Email
Datasheet (Italiano)
Filename: IT_datasheet_TI-G102i_(v1.6R).pdf
Date: 4/3/2025
File Size: 2.33 MB
Download Email

Quick Installation Guide

Quick Installation Guide
Filename: Industrial_L2_Managed_Switches.pdf
Date: 4/3/2025
File Size: 15.05 MB
Download

Product Images

PNG Image
File Size: : 3.81 MB
Date: : 4/3/2025
Download
PNG Image
File Size: : 5.01 MB
Date: : 4/3/2025
Download
PNG Image
File Size: : 5.85 MB
Date: : 4/3/2025
Download
PNG Image
File Size: : 7.63 MB
Date: : 4/3/2025
Download
ROHS compliant Non-Disposable
Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.1ax
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3az
Device Interface
  • 8 x Gigabit ports
  • 2 x 100/1000Mbps SFP slots
  • 6-pin removable terminal block (primary/RPS power inputs & alarm relay output)
  • DIP switches
  • LED indicators
  • Reset button
Data Transfer Rate
  • Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit Ethernet: 2000Mbps (full duplex)
Performance
  • Switch fabric: 20Gbps
  • RAM buffer: 512KB
  • MAC address table: 8K entries
  • Jumbo frames: 10KB
  • Forwarding mode: store and forward
  • Forwarding rate: 14.88Mpps (64-byte packet size)
Management
  • HTTP web-based GUI
  • CLI: Telnet / SSHv2
  • SNMP v1, v2c, v3
  • SNMP trap (up to 5 receivers)
  • RMON groups 1/2/3/9
  • Device configuration backup & restore, upgrade firmware, reboot, and reset to default
  • Multiple administrative or read-only user accounts
  • Enable or disable power saving mode per port
  • Static MAC entries
  • LLDP (Link layer discovery protocol)
  • Netlite device map
  • ONVIF device discovery
  • SNTP
  • SMTP alert
  • Syslog
  • Port statistics/utilization
  • Traffic monitor
  • Port mirror: one to one, many to one
  • Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
  • Loopback detection
  • DHCP relay/option 82
  • Modbus/TCP
  • SFP DDMI (Digital Diagnostic Monitoring Interface)
Hive Enabled Management
  • Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser
  • Multi-device management
  • Provisioning through scheduled batch firmware or configuration updates for multiple switches
  • Event/hardware network monitoring (CPU/memory utilization)
  • Enable & disable PoE, set PD (powered device) alive check, configure PoE scheduling, and monitor PoE budget utilization (for PoE switches only)
  • Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
MIB
  • MIB II RFC 1213
  • Bridge MIB RFC 1493
  • RMON (Group 1,2,3,9) RFC 2819 RFC 1757
Spanning Tree
  • IEEE 802.1d STP (spanning tree protocol)
  • IEEE 802.1w RSTP (rapid spanning tree protocol)
  • BPDU filter, guard, and root guard
  • IEEE 802.1s MSTP (multiple spanning tree protocol)*
Link Aggregation
  • Static link aggregation and 802.3ad dynamic LACP (Up to 3 groups)
Quality of Service (QoS)
  • 802.1p Class of service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth control per port
  • Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
VLAN
  • 802.1Q tagged VLAN
  • MAC-based VLAN
  • Port isolation
  • Up to 256 VLAN groups, ID range 1-4094
Multicast
  • IGMP snooping v1, v2, v3
  • IGMP querier
  • IGMP fast leave
  • Up to 256 multicast groups
  • Static multicast entries
Access Control
  • 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
  • DHCP snooping/screening
  • Trusted host/IP access list for management access
  • Port Security/MAC address learning restriction (Up to 100 entries per port)
  • Static/dynamic ARP inspection
ACL
  • Source/Destination MAC address
  • Source/Destination IP address
  • Source Interface
  • VLAN ID
  • EtherType
  • TCP/UDP port 1-65535
Special Features
  • Netlite device discovery and map display in GUI
  • Port security: MAC address learning restriction per port
  • DHCP relay/option 82 & DHCP server snooping/screening support
  • Wide operating temperature range
  • Redundant power inputs
  • Alarm relay triggered by power failure
  • Surge and ESD protection
Power
  • PWR (Primary) terminal input: 12 – 60V DC
  • RPS (Redundant) terminal input: 12 – 60V DC
  • Compatible power supply: TI-M6024 (60W), TI-S12024 (120W), TI-S12048 (120W), and TI-S24048 (240W) sold separately
  • Max. consumption: 13W
Terminal Block
  • Redundant power inputs, alarm relay contact, 6-pin
  • Wire range: 0.5 mm^2 to 2.5 mm^2
  • Solid wire (AWG): 12-26
  • Stranded wire (AWG): 12-26
  • Wire strip length: 10-11mm
DIP Switch
SwitchStatusFunction
1OFFDisable alarm relay for PWR power input
ONEnable alarm relay for power failure on PWR power input
2OFFDisable alarm relay for RPS power input
ONEnable alarm relay for power failure on RPS power input
3OFFStorm control managed by switch configuration
ONEnable storm control (Broadcast and DLF rate set to 300pps) Takes precedence over storm control switch configuration
4OFF802.1p QoS managed by switch configuration
ONEnable 802.1p QoS on ports 1 and 2 (Set CoS priority to tag 4 on ports 1 and 2) Takes precedence over 802.1p QoS switch configuration
5OFFPort 9 SFP set to Gigabit speed full duplex
ONPort 9 SFP set to 100Mbps speed full duplex
6OFFPort 10 SFP set to Gigabit speed full duplex
ONPort 10 SFP set to 100Mbps speed full duplex
Alarm Relay Output
  • Relay output with current carrying capacity of 1A, 24V DC
  • Short circuit mode when one power source is connected
  • Open circuit mode when two power sources are connected
Enclosure
  • IP30 rated metal enclosure
  • Fanless passive cooling
  • DIN-Rail mount
  • Grounding point
  • ESD (Ethernet) Protection: 8KV DC
  • Surge (Power) Protection: 2KV DC
MTBF
  • 617,085 hours @ 25° C
  • 113,378 hours @ 75° C
Operating Temperature
  • -40° – 75° C (-40° – 167° F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
Weight
  • 884g (1.95 lbs.)
Certifications
  • CE
  • FCC
  • Shock (IEC 60068-2-27)
  • Freefall (IEC 60068-2-32)
  • Vibration (IEC 60068-2-6)
Warranty
  • 3 year

PACKAGE CONTENTS
  • TI-G102i
  • Quick Installation Guide
  • Removable terminal block
  • DIN rail mounting bracket

*Disclaimer: *IEEE 802.1s MSTP (multiple spanning tree protocol) will be added in a future firmware update

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.