Register your Product
Register your product to stay informed with the latest product updates and warranty information.
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware Version: 1.0.4
Firmware Release Date: 5/2013
Note:
Version 1.10.0
Product InformationVersion 1.10.0
Product InformationCamera | |
General | Sensor: 1/4” color CMOS SOC image sensor |
Audio | Built-in omni-directional microphone/speaker |
Image & Video | Compression: MPEG-4 / MJPEG |
I/O Connector | Input: 2 sets (pin 1/2, pin 3/4) |
SD slot | Secure Digital card (up to 16G) |
Hardware | |
Network | IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIX |
LED | Power, Link |
Reset Button | Reset settings |
Power Consumption | 9 watts |
Power | 12V, 1.5A external power adapter |
Dimension | 170 x 80 x 40mm (6.7 x 3.2 x 1.6 in.) |
Stand Dimension | 128 mm (4.7 in.) |
Weight | Camera: 260g (9.2 oz.) |
Temperature | Operating: 0°C ~ 40°C (39°F ~ 104°F) |
Certification | CE, FCC |
Requirement | |
To View | Internet Explorer 6.0 or above, Safari 2.0 or above, Firefox 2.0 or above, Opera, Netscape, and Google Chrome |
To Run Software | Windows XP (32/64-bit), Vista (32/64-bit) |
IPView Pro 2.0 | Channel: supports up to 32 cameras |
Network Protocols | IPV4, ARP, TCP, UDP,ICMP |
Management | |
Account | Up to 20 user accounts |
Remote | Remote Management supported |
Backup / Restore | Save/retrieve configuration files |
Log | System log up to 500 entries |
Settings | |
Image | Brightness, contrast, noise reduction, saturation, sharpness, white balance, flip, mirror (horizontal/vertical), black/white mode |
Video | Profile 1-2
Profile 3
Profile 4 (for mobile device only)
|
Recording | Resolutions: 4 profiles |
Snapshot | Trigger event: motion detection or digital input signal |
Port Settings | HTTP port: 80 (default) |
Digital Zoom | 16x |
Dynamic DNS | Yes |
Time | Synchronize with NTP server or set time/date manually |
PACKAGE CONTENTS |
|