Cable/DSL Advanced VPN Firewall Router

TW100-BRV304   (Version 2)

  • Provide up to 70 Virtual Private Networks tunnels
  • Enjoy Fast Ethernet networking speeds
  • Advanced firewall protection (NAT, NAPT & SPI)
  • Secure remote management allows global network monitoring
DISCONTINUED PRODUCT
The TW100-BRV304 (Version 2) has been discontinued. It has been replaced by the TWG-431BR (Version v1.0R). For a list of discontinued products, click here.
Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only


Filename:
TW100-BRV304v2_1014.zip

Release Note:
This firmware is for TW100-BRV304 Version 2. To check the version number, pleaselook for the serial number sticker on the bottom of the unit, the version number isprinted on the sticker.

Firmware Upgrade Instruction:
Please download and unzip the firmware file.


Filename: TW100-BRV304v2_1014.zip
SHA-1 Checksum: 5675B13FC37AFD2EFB76AD5BFFDE58DDEBA74E8D
Date: 7/28/2017
File Size: 1.06 MB
Datasheet
Filename: EN_Spec_TW100-BRV304.pdf
Date: 7/20/2006
File Size: 312.76 KB

Filename: FR_Spec_TW100-BRV304.pdf
Date: 7/20/2006
File Size: 315.53 KB

Filename: GE_Spec_TW100-BRV304.pdf
Date: 7/20/2006
File Size: 316.87 KB

Filename: SP_Spec_TW100-BRV304.pdf
Date: 7/20/2006
File Size: 316.03 KB

Filename: RU_Spec_TW100-BRV304.pdf
Date: 7/20/2006
File Size: 1.32 MB
Quick Installation Guide
Filename: QIG_TW100-BRV304v2.pdf
Date: 11/30/2005
File Size: 23.39 MB

Filename: PO_QIG_TW100-BRV304(old).pdf
Date: 10/19/2007
File Size: 2.94 MB

Filename: QIG_TW100-BRV304_IT.pdf
Date: 11/30/2005
File Size: 1.37 MB

Filename: QIG_TW100-BRV304_EST_ONLY.pdf
Date: 1/26/2007
File Size: 1.12 MB

Filename: POL_QIG_TW100-BRV304.pdf
Date: 7/23/2007
File Size: 1.06 MB
User's Guide
Filename: UG_TW100-BRV304v2.pdf
Date: 12/3/2005
File Size: 1.55 MB
Frequently Asked Questions (FAQ)
FAQ
Filename: FAQ_TW100-BRV204_BRV304.pdf
Date: 6/30/2006
File Size: 1.56 MB
Product Images
JPEG Image
File Size: : 332.82 KB
Date: : 1/26/2007
JPEG Image
File Size: : 345.99 KB
Date: : 1/26/2007
JPEG Image
File Size: : 354.51 KB
Date: : 1/26/2007
TIFF Image
File Size: : 2.94 MB
Date: : 1/26/2007
TIFF Image
File Size: : 3.20 MB
Date: : 1/26/2007
TIFF Image
File Size: : 3.30 MB
Date: : 1/26/2007
Well Known Ports 1) Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). 2) Click Security then Firewall Rules on the left hand side. 3) Select...
1) Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). 2) Click Microsoft VPN then Server on the left hand side. Place a check mark in Enable PPTP (VPN)...
Use the following screenshots as a guide. Scenario PC1 (192.168.1.x)-BRV204 (66.135.11.92) ~ BRV304 (64.11.212.22)–PC 2 (192.168.2.x) Simply match both ends information. After the connections are created, 192.168.1.x should be able to ping 192.168.2.x. Settings on BRV204 Settings on BRV3...
Use the following screenshots as a guide Scenario PC1 (192.168.1.x)-BRV204 (dynamic) ~ BRV304 (64.11.212.22)–PC 2 (192.168.2.x) Simply match both ends information. After the connections are created, 192.168.1.x should be able to ping 192.168.2.x. Important Note: 1. Please match Local/Remote...
The MAC Address can be found on a label on the bottom of the router. You can alternately find it by doing the following: 1) Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (bl...
1) Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel. 2) Double-Click on the Network Connection icon. 3) Right-Click on the Local Area Connection icon then click on Properties. 4) Highlight the Internet ...
1) Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). 2) Click on LAN on the left hand side. 3) Change the IP address in the IP Address field ...
The default username & password for the TW100-BRV204/304 are both (blank). There is no username and password set by default....
1) Locate the reset button on the back of the TW100-BRV204/304. 2) Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration. ...
1) Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). 2) Click on Security then Admin Login on the left hand side. 3) Enter in the desired u...
1) Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). 2) Click on Internet then WAN Port on the left hand side. 3) Choose None (Direct Conne...
Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address. 1) Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and passwor...
1) Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). 2) Click on Internet then WAN Port on the left hand side. 3) Choose PPPoE for the Logi...
Option 1: Go to the Status section of the configuration page, and click the Connection Detail button. Click the Release/Renew button to allow the router to refresh your connection. Then, try accessing a website such as https://www.TRENDnet.com with your web browser. Option 2: Turn off your Cable/DS...
You can simply contact your Internet Service Provider's (ISP) Customer Service or Technical Support Department for the correct information. ...
Verify your hardware and TCP/IP settings again by reviewing the instructions in sections 1-3. Also, make sure the Power, WAN, and on the LAN lights on the Router's front panel are on. Then, try accessing https://192.168.0.1 again using your web browser. ...
Hardware
Standards:
  • IEEE 802.3 (10-Base T)
  • 802.3u (100-Base TX)
Protocols: NAT, PPPoE, NTP, SMTP, HTTP, TFTP, DHCP, TCP/IP, PAP, CHAP, RIP1, RIP2, DDNS
WAN: 1 x 10/100Mbps Port (Internet)
LAN: 3 x 10/100Mbps Auto-MDIX Ports
DMZ:1 x 10/100Mbps Auto-MDIX Port
LED Indicators:
  • Unit: Power, Status, PPPoE
  • LAN Ports/DMZ Port: Link/Act, 100
Power Adapter:12V DC, 800mA
Dimensions
(L x W x H):
170 x 147 x 27 mm (6.7x 5.8 x 1.06 inches)
Weight: 0.6 kg( 20.8 oz.)
Temperature:
  • Operating: 0° to 40° C (32° to 104° F)
  • Storage: -10° to 70° C (14° to 158° F)
Humidity:
  • Operating: 0 % ~ 80 % (non-condensing)
  • Storage: 0% ~ 95% (non-condensing)
Certifications: FCC, CE, VCCI
Router
Firewall:NAT Firewall, SPI Firewall
Security:URL Filter, Access Control, Password Protection, Email Alert and Logs
VPN (IPSec):MD5-HMAC/SHA1-HMAC Authentication, DES-CBC, 3DES-CBC Encryption, Internet Key Exchange, Manual Key Negotiation
VPN Tunnels:70 (IPSec), 10 (PPTP)
VPN Pass-Through: IPSec, PPTP, L2TP (100 Sessions)

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.