Note:
- This driver set includes Windows XP driver.
- When installing the TEG-PCISXplus adapter in Windows 2000 and XP, Windows would automatically load the default “National Semiconductor DP83820 Gigabit Adapter” driver, which does not work with fiber Gigabit adapter.
Filename: Driver_TEGPCISXplus_1.2.zip
SHA-1 Checksum: 1F74AAED0122ECC6A06ED4B86495CDEB8B53CC81
Date
7/25/2017
File Size
399.16 KB
Filename: Spec_TEG-PCISXplus.pdf
Date
5/10/2013
File Size
227.97 KB
Filename: UG_TEG-PCISXplus.pdf
Date
8/18/2004
File Size
47.52 KB
Hardware |
Standards: | - IEEE 802.3z 1000Base-SX Gigabit Ethernet
|
Protocol: | |
Network Media: | - 62.5/125um multi-mode fiber optic cable with SC type connector, 220 meters max. 50/125um multi-mode fiber optic cable with SC type connector, 550 meters max.
|
Host Interface: | - 32/64-Bit PCI rev. 2.1/2.2
|
Supported Drivers: | - Microsoft Windows 98/Me/2000/NT4.0/XP, Novell Netware Server 5.x, Linux 2.2, 2.4
|
Diagnostic LEDs: | |
Network Data Transfer: | |
Dimensions: | - 175 x 69 mm (6.9 x 2.7 inches)
|
Weight: | - Approximately 120 g. (4.25 Oz.)
|
Temperature: | - Operating: 0° ~ 65° C (32° ~ 149° F)
- Storage: -10° ~ 70° C (14° ~ 158° F)
|
Humidity: | - 10% - 90% (non-condensing)
|
Certifications: | - FCC Class B, CE Mark B, VCCI-B
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.