6-Port Industrial Gigabit L2+ Managed PoE++ DIN-Rail Switch

TI-BG62i   (Version v1.0R)

  • 4 x Gigabit PoE++ ports
  • 2 x SFP slots
  • Supports 1000Base-FX fiber SFP modules
  • 360W PoE power budget
  • Perpetual PoE provides PoE power to connected devices at booting
  • Fast PoE remembers per port PoE power draw of connected devices at booting
  • PoE alive check restarts unresponsive PoE powered devices
  • 12Gbps switching capacity
  • Hardened IP30 rated metal housing
  • Includes DIN-Rail mounting bracket
  • Operating temperature range of -40° – 75° C (-40° – 167° F)
  • Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
  • IEEE 802.1p QoS with queue scheduling support
  • CLI (Console / Telnet / SSH), Web (HTTP / HTTPS), SNMP v1 / 2c / 3 management
  • 802.1Q / Q-in-Q VLAN and IGMP Snooping / MLD / MVR support
  • 802.1p / DSCP / Queue Scheduling (SPQ / WRR) QoS support
  • Bandwidth control per port
  • Dual inputs provide redundant power with overload current protection
  • Alarm output triggered by power failure
  • Supports Ethernet Ring Protection Switching (ERPSv2)
  • Power supply sold separately (model: TI-S48048)
  • NDAA / TAA compliant
  • Lifetime Warranty*
NDAA/TAA Compliant

Firmware

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

Model: TI-BG62i
Hardware Version: v1.xR
------------------------------------------

Firmware Version: 1.0.2.S0
Release Date: 03/2023
Release Note:

  • -Updated SSL certificate/key
  • -Added reset option to reset all configuration settings except device IP configuration

Filename: FW_TI-BG62i_v1(1.0.2.S0).zip
SHA-1 Checksum: A5B17F9613F86EFFB1C3389EEF08EE77AA91C5DB
Date: 3/20/2023
File Size: 20.75 MB

Datasheet

Filename: EN_datasheet_TI-BG62i_(v1.0R)_.pdf
Date: 2/8/2023
File Size: 759.32 KB
Filename: FR_datasheet_TI-BG62i_(v1.0R).pdf
Date: 2/8/2023
File Size: 1.43 MB
Filename: GE_datasheet_TI-BG62i_(v1.0R).pdf
Date: 2/8/2023
File Size: 1.48 MB
Filename: PO_datasheet_TI-BG62i_(v1.0R).pdf
Date: 2/8/2023
File Size: 1.44 MB
Filename: SP_datasheet_TI-BG62i_(v1.0R).pdf
Date: 2/8/2023
File Size: 1.43 MB
Filename: IT_datasheet_TI-BG62i_(v1.0R).pdf
Date: 2/8/2023
File Size: 1.45 MB

Quick Installation Guide

Filename: English_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.
Date: 2/8/2023
File Size: 4.85 MB
Filename: French_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.p
Date: 2/8/2023
File Size: 3.90 MB
Filename: German_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.p
Date: 2/8/2023
File Size: 2.85 MB
Filename: Portuguese_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG6
Date: 2/8/2023
File Size: 2.95 MB
Filename: Spanish_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.
Date: 2/8/2023
File Size: 2.94 MB
Filename: Italian_TI-PG1284i_TI-PG541i_TI-PG102i_TI-PG102i-M_TI-BG62i.
Date: 2/8/2023
File Size: 2.91 MB

User's Guide

Filename: TI-BG62i_UG_072023.pdf
Date: 8/14/2023
File Size: 4.08 MB

Product Images

PNG Image
File Size: : 6.36 MB
Date: : 2/8/2023
PNG Image
File Size: : 3.99 MB
Date: : 2/8/2023
PNG Image
File Size: : 6.20 MB
Date: : 2/8/2023
PNG Image
File Size: : 5.43 MB
Date: : 2/8/2023
PNG Image
File Size: : 7.64 MB
Date: : 2/8/2023
ROHS compliant WEEE crossed-out bin symbol.
Yes, if the primary power supply fails for any reason the secondary power supply will take over with the intention of increasing system reliability....
A power supply is not included. Many installations scenarios will have power readily available. If power is not available we do offer the TI-S24048 power supply....
Download the latest firmware update from https://www.TRENDnet.com/support/. The firmware download will be in a compressed format. You will need to extract or unzip the file. We recommend extracting the file where you can locate it. For example, your desktop.Open your web browser and enter the IP add...
You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
If the password has been lost for the TI-BG62i you will need to contact support services to reset the Switch back to default settings....
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TI-BG62i power budget is 360 Watts total usi...
You can find detailed product specifications on our website under the Products section. You can find a detailed dip Switch legend under the product specifications and in the user's guide available for download from our website under the Support section....
TRENDnet PoE Switches will support 802.3af, 802.3at, and 802.3bt . Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE Switches. Many non-standard PoE devices use passive or pr...
Hardened products are designed to withstand harsh industrial environments and temperatures of 40 to 75 °C (-40 to 167 °F). Check the product specifications for IP ratings, extreme operating temperature ranges and power options....
Hardened PoE appliances will require 24 – 57 V DC. Hardened non-PoE appliances typically support 12 – 56 V DC. Always check detailed product specifications on our website under the Products section. The TI-BG62i has a power input of 48 – 57 V DC using the TI-S48048 power supply, sold separately....
The TI-BG62i power budget is 360 Watts total using the TI-S48048 power supply, sold separately. You can also supply power to hardened devices with existing electrical systems. Be sure to check detailed product specifications on our website under the Products section for exact power requirements....
Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.1ax
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3az
  • IEEE 802.3af
  • IEEE 802.3at
  • IEEE 802.3bt
Device Interface
  • 4 x Gigabit PoE++ ports
  • 2 x 100/1000Mbps SFP slots
  • DIP switches
  • 6-pin removable terminal block (primary/RPS power inputs & alarm relay output)
  • 4-pin removable terminal block (digital input/output)
  • LED indicators
  • Reboot button
Data Transfer Rate
  • Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit Ethernet: 2000Mbps (full duplex)
Performance
  • Switch fabric: 12Gbps
  • RAM buffer: 1.5MB
  • MAC address table: 16K entries
  • Jumbo frames: 10KB
  • Forwarding mode: store and forward
  • Forwarding rate: 8.9Mpps (64-byte packet size)
Management
  • HTTP web-based GUI
  • CLI: Telnet / SSHv2
  • SNMP v1, v2c, v3
  • SNMP trap (up to 5 receivers)
  • RMON groups 1/2/3/9
  • Device configuration backup & restore, upgrade firmware, reboot, and reset to default
  • Multiple administrative or read-only user accounts
  • Enable or disable power saving mode per port
  • Static MAC entries
  • LLDP (Link layer discovery protocol)
  • Netlite device map
  • ONVIF device discovery
  • SNTP
  • SMTP alert
  • Syslog
  • Port statistics/utilization
  • Traffic monitor
  • Port mirror: one to one, many to one
  • Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
  • Loopback detection
  • DHCP relay/option 82
  • Xpress Ring
  • ERPS (Ethernet Ring Protection Switching) G8032v2
  • SFP DDMI (Digital Diagnostic Monitoring Interface)
MIB
  • MIB II RFC 1213
  • Bridge MIB RFC 1493
  • RMON (Group 1,2,3,9) RFC 2819 RFC 1757
Spanning Tree
  • IEEE 802.1d STP (spanning tree protocol)
  • IEEE 802.1w RSTP (rapid spanning tree protocol)
  • IEEE 802.1s MSTP (multiple spanning tree protocol)
  • BPDU filter, guard, and root guard
Link Aggregation
  • Static link aggregation and 802.3ad dynamic LACP (Up to 3 groups)
Quality of Service (QoS)
  • 802.1p Class of service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth control per port
  • Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
VLAN
  • 802.1Q tagged VLAN
  • MAC-based VLAN
  • Port isolation
  • Up to 256 VLAN groups, ID range 1-4094
Multicast
  • IGMP snooping v1, v2, v3
  • IGMP querier
  • IGMP fast leave
  • Up to 256 multicast groups
  • Static multicast entries
Access Control
  • 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
  • DHCP snooping/screening
  • Trusted host/IP access list for management access
  • Port Security/MAC address learning restriction (Up to 100 entries per port)
  • Static/dynamic ARP inspection
ACL
  • Source/Destination MAC address
  • Source/Destination IP address
  • Source Interface
  • VLAN ID
  • EtherType
  • TCP/UDP port 1-65535
Layer 3 Features
  • IPv4 / IPv6 static routing
  • IPv4 / IPv6 proxy ARP
  • IP interfaces: Up to 16
  • Routing table entries: Up to 500 (IPv4: 400 / IPv6: 100)
  • DHCP Relay / Option 82
Special Features
  • Netlite device discovery and map display in GUI
  • Port security: MAC address learning restriction per port
  • DHCP relay/option 82 & DHCP server snooping/screening support
  • Wide operating temperature range
  • Dual redundant power inputs
  • Alarm relay triggered by power failure
  • Surge and ESD protection
  • Fast PoE & Perpetual PoE
Power
  • PWR (Primary) terminal input: 48 – 57V DC
  • RPS (Redundant) terminal input: 48 – 57V DC
  • Compatible power supply: TI-S12048 (120W), TI-S24048 (240W), TI-S48048 (480W) sold separately
  • Max. Consumption: 20W (no PoE load), 380W (full PoE load)
PoE
  • PoE budget: 360W@48V DC input,
  • PoE++ (802.3bt): Up to 95W per port
  • PoE++: mode A+ (1, 2, 3, 6) and mode B- (4, 5, 7, and 8) for power
  • PoE auto classification
  • PoE port priority/power scheduling/PD alive check
  • Fast PoE/perpetual PoE
  • Over current/short circuit protection
Terminal Block
  • Redundant power inputs, alarm relay contact, 6 pin
  • Wire range: 0.5 mm^2 to 2.5 mm^2
  • Solid wire (AWG): 12-26
  • Stranded wire (AWG): 12-26
  • Wire strip length: 10-11mm
DIP Switch
SwitchStatusFunction
1OFFDisable alarm relay for PWR power input
ONEnable alarm relay for power failure on PWR power input
2OFFDisable alarm relay for RPS power input
ONEnable alarm relay for power failure on RPS power input
Alarm Relay Output
  • Relay output with current carrying capacity of 1A, 24V DC
  • Short circuit mode when one power source is connected
  • Open circuit mode when two power sources are connected
Enclosure
  • IP30 rated metal enclosure
  • Fanless passive cooling
  • DIN-Rail mount
  • Grounding point
  • ESD (Ethernet) Protection: 8KV DC
  • Surge (Power) Protection: 6KV DC
MTBF
  • 379,100 hours @ 25° C
  • 48,624 hours @ 75° C
Operating Temperature
  • -40° – 75° C (-40° – 167° F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 170 x 118 x 50mm (6.69 x 4.65 x 1.97 in.)
Weight
  • 956g (2.1 lbs.)
Certifications
  • CE
  • FCC
  • Shock (IEC 60068-2-27)
  • Freefall (IEC 60068-2-32)
  • Vibration (IEC 60068-2-6)
Warranty

PACKAGE CONTENTS

  • TI-BG62i
  • Quick Installation Guide
  • Removable terminal block
  • DIN rail mounting bracket

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.