Utility Version: 3.5.4
Release Date: 6/2018
OS Compatibility: Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003/2008 Server
Note:
- Added support for EdgeSmart switch models TEG-S50ES, TEG-S80ES, TPE-TG50ES, TPE-TG82ES, TPE-P521ES
- Added support for max. administrator password 20 alphanumeric characters.
***Important Note: Completely uninstall previous of the management utility before installing this version.***
Filename: Utility_WebSmartManagement(v3.5.4).zip
SHA-1 Checksum: 3D252F0D943CDDB82BCFD6AA6A883E72B8AF18A8
Date
7/12/2018
File Size
1.43 MB
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Model: TPE-P521ES
Hardware Version: v1.0R
Firmware Version: 1.01.019
Release Date: 01/2020
Release Note:
- Adjusted timing for hardware reset button.
Filename: FW_TPE-P521ES_v1(1.01.019).zip
SHA-1 Checksum: C9313D4F61489964FA04734BCCD75E40AE9807FD
Date
1/17/2020
File Size
848.13 KB
Hardware Version: v1.0R
MIB Version: 1.01
Release Date: 10/2019
Note:
Filename: MIB_TPE-P521ES_v1(1.01).zip
Date
10/29/2019
File Size
26.88 KB
Filename: EN_datasheet_TPE-P521ES_(V1.0R).pdf
Date
11/10/2020
File Size
1.12 MB
Filename: FR_datasheet_TPE-P521ES_(V1.0R).pdf
Date
11/10/2020
File Size
769.04 KB
Filename: GE_datasheet_TPE-P521ES_(V1.0R).pdf
Date
11/10/2020
File Size
768.54 KB
Filename: PO_datasheet_TPE-P521ES_(V1.0R).pdf
Date
11/10/2020
File Size
769.95 KB
Filename: SP_datasheet_TPE-P521ES_(V1.0R).pdf
Date
11/10/2020
File Size
1.09 MB
Filename: RU_datasheet_TPE-P521ES_(V1.0R).pdf
Date
11/10/2020
File Size
970.92 KB
Filename: IT_datasheet_TPE-P521ES_(V1.0R).pdf
Date
11/10/2020
File Size
769.39 KB
Filename: TPE-P521ES(V1).pdf
Date
7/12/2018
File Size
6.41 MB
Filename: UG_TPE-P521ES_(v1.0R)-10282020.pdf
Date
10/28/2020
File Size
2.86 MB
PNG Image
File Size: 1.94 MB
Date: 7/12/2018
Download
PNG Image
File Size: 1.39 MB
Date: 7/12/2018
Download
PNG Image
File Size: 2.45 MB
Date: 7/12/2018
Download
PNG Image
File Size: 1.23 MB
Date: 7/12/2018
Download
TRENDnet PoE switches will support 802.3af, 802.3at or both. Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE switches. Many non-standard PoE devices use passive or propriet...
You can find detailed product specifications on our website under the Products section.
Each switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire switch. Please check detailed product specifications for PoE budget under the Products sections of our website....
A switch cannot share an IP address provided by your ISP with multiple devices. You will need a router to share your Internet service with multiple devices. The switch can be used to expand the amount of available ports on your network. ...
Only managed or web smart PoE switches will have reset instruction. Unmanaged PoE switches are not configurable and do not have settings to reset. Your switch will have a reset button. This button is typically recessed and located on the front or the back of the switch. You will need a small pin or ...
Only managed or web smart PoE switches are configurable. Unmanaged PoE switches will not have management login information. You will find management login and default settings in the quick installation guide and user's guide. Included with the switch is a hard copy of the quick installation guide. T...
Standards | - IEEE 802.1d
- IEEE 802.1w
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3ab
- IEEE 802.3af
- IEEE 802.3at
- IEEE 802.3az
|
Device Interface | - 1 x Gigabit PoE+ PD port
- 2 x Gigabit PoE PSE ports
- 2 x Gigabit Ports
- LED indicators
- Reset button
|
Data Transfer Rate | - Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit Ethernet: 2000Mbps (full duplex)
|
Performance | - Switch fabric: 10Gbps
- RAM buffer: 512KB
- MAC Address Table: 2K entries
- Jumbo Frames: 9KB
- Forwarding rate: 7.44Mpps (64-byte packet size)
|
Management | - HTTP Web based GUI
- SNMP v1, v2c
- Cable diagnostic test
- Backup/Restore Configuration
- Upload Firmware
|
Spanning Tree | - IEEE 802.1d STP (spanning tree protocol)
- IEEE 802.1w RSTP (rapid spanning tree protocol)
|
Link Aggregation | - Static link aggregation (up to 2 groups)
|
Quality of Service (QoS) | - Port-based QoS
- 802.1p Class of Service (CoS)
- Bandwidth Control/Rate Limiting per port (Min. Limit: 8Kbps)
- Queue Scheduling: Strict Priority (SP), Weighted Fair Queueing (WFQ)
|
VLAN | - Port-based VLAN
- 802.1Q Tagged VLAN
- Up to 32 VLAN groups, ID Range 1-4094
- Private VLAN
- Asymmetric VLAN
- Voice VLAN (5 user defined OUIs)
|
Multicast | - IGMP Snooping v1/2/3
- Block unknown multicast source
- Up to 32 multicast groups
|
Port Mirror | |
Storm Control | - Broadcast (Min. Limit: 8Kbps)
- Multicast (Min. Limit: 8Kbps)
- Loopback Detection
|
Special Features | - PoE Powered
- Enable/disable 802.3az Power Saving
- Wall mountable
|
Power | - IEEE 802.3at (30W) or IEEE 802.3af (15.4W) PoE input only (no external power supply)
- IEEE 802.3at Type 2 PoE PD Class 4
- IEEE 802.3af Type 1 PoE PD Class 0
- Max. Consumption 2.4W (without PoE load)
- Max. Consumption 20.4W (with max PoE load)
|
PoE | - 18W PoE Budget with IEEE 802.3at (30W) input power
- 8W PoE Budget with IEEE 802.3af (15.4W) input power
- PoE Mode A: Pins 1,2 for power and pins 3,6 for power
- PD auto classification
- Over current/short circuit protection
|
Fan / Acoustics | |
MTBF | |
Operating Temperature | - 0° – 40° C (32° – 104° F)
|
Operating Humidity | |
Dimensions | - 150 x 97 x 28.6mm (5.9 x 3.81 x 1.12 in.)
|
Weight | |
Certifications | |
Warranty | |
PACKAGE CONTENTS |
- TPE-P521ES
- Quick Installation Guide
|
*If 802.3at PoE+ powered, the device can supply PoE power for up to two PoE class 1 or class 2 PDs or one PoE class 0 or class 3 PD.
**If 802.3af PoE powered, the device can supply PoE power for one PoE class 1 or class 2 PD.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.