Industrial Outdoor 10G SFP+ to 10G PoE++ Media Converter (95W)
TI-OBF711 (Version V1)
- 1 x 10G LC duplex single mode fiber optic port
- 1 x 10G PoE++ RJ45 port
- Supports 1310nm single mode network transmissions up to 20km (12.42mi.)
- Waterproof IP67-rated metal housing
- Provides up to 95W for PoE, PoE+ and PoE++ compliant devices
- Extreme operating temperature range -40°– 75° C (-40° – 167° F)
- Includes pole mount hardware
- NDAA / TAA compliant (U.S. and Canada only)
Datasheet
Filename: EN_datasheet_TI-OBF711_(v1.xR).pdf
Date: 8/5/2025
File Size: 3.54 MB
Filename: FR_datasheet_TI-OBF711_(v1.xR).pdf
Date: 8/5/2025
File Size: 3.68 MB
Filename: GE_datasheet_TI-OBF711_(v1.xR).pdf
Date: 8/5/2025
File Size: 3.71 MB
Filename: PO_datasheet_TI-OBF711_(v1.xR).pdf
Date: 8/5/2025
File Size: 3.60 MB
Filename: SP_datasheet_TI-OBF711_(v1.xR).pdf
Date: 8/5/2025
File Size: 3.70 MB
Filename: IT_datasheet_TI-OBF711_(v1.xR).pdf
Date: 8/5/2025
File Size: 3.65 MB
Quick Installation Guide
Filename: qig_lineart_TI-OBF711_(v1.xR).pdf
Date: 8/5/2025
File Size: 4.35 MB
Product Images
The TRENDnet TI-OBF711 supports 802.3af, 802.3at or 802.3bt draft. Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE power sourcing equipment. Many non-standard PoE devices u...
Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website....
Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. TX to RX and RX to TX....
To establish a link, both the fiber and copper ports must be connected. Connecting only the fiber cables will not produce a link. Gigabit converters must be connected to Gigabit on the copper side. They will not link to a Fast Ethernet copper port. On the fiber interface, the Transmit and Receive co...
While TRENDnet cannot guarantee compatibility with third party hardware, TRENDnet does not employ or implement proprietary mechanisms within our fiber converters. If the third party converter adheres to specifications and also does not use proprietary measures they should be compatible....
TRENDnet TI-OBF711 has an LC type connector.
You will need to identify the type of fiber cable you have. Whether it is multi-mode or single mode, if it is 62.5/125 µm or 50/125 µm, etc. Typically you can verify the cable type from the cable jacket, your network documentation or the specifications of the devices you currently have connected. Af...
Outdoor products are designed to withstand outdoor environments. Check the product specifications for IP ratings, operating temperature ranges, dust and water resistant....
| Standards |
|
|---|---|
| Device Interface |
|
| Performance |
|
| Fiber |
|
| PoE |
|
| Power |
|
| MTBF |
|
| Enclosure |
|
| Operating Temperature |
|
| Operating Humidity |
|
| Dimensions |
|
| Weight |
|
| Certifications |
|
| Warranty |
|
PACKAGE CONTENTS |
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
