DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware Version: 1.01.06
Release Date:5/2021
Release Note:
- Fixed LACP connectivity issues
Filename: FW_TEG-7080ES_v1(1.01.06).zip
SHA-1 Checksum: 5B5A87D4D240F937504A9D2F8613271474EF681E
Date
5/14/2021
File Size
1.03 mb
Filename: EN_datasheet_TEG-7080ES(v1.0R).pdf
Date
4/10/2018
File Size
727.41 kb
Filename: FR_datasheet_TEG-7080ES(v1.0R).pdf
Date
4/10/2018
File Size
743.31 kb
Filename: GE_datasheet_TEG-7080ES(v1.0R).pdf
Date
12/17/2018
File Size
705.58 kb
Filename: PO_datasheet_TEG-7080ES(v1.0R).pdf
Date
2/20/2018
File Size
749.06 kb
Filename: SP_datasheet_TEG-7080ES(v1.0R).pdf
Date
4/10/2018
File Size
743.65 kb
Filename: RU_datasheet_TEG-7080ES(v1.0R).pdf
Date
4/10/2018
File Size
767.44 kb
Filename: IT_datasheet_TEG-7080ES(v1.0R).pdf
Date
4/10/2018
File Size
745.35 kb
Filename: English_TEG-7080ES(V1.0R).pdf
Date
2/15/2018
File Size
1.80 mb
Filename: French_TEG-7080ES(V1.0R).pdf
Date
2/15/2018
File Size
1.86 mb
Filename: German_TEG-7080ES(V1.0R).pdf
Date
2/15/2018
File Size
1.10 mb
Filename: Portuguese_TEG-7080ES(V1.0R).pdf
Date
2/15/2018
File Size
1.11 mb
Filename: Spanish_TEG-7080ES(V1.0R).pdf
Date
2/15/2018
File Size
1.12 mb
Filename: Russian_TEG-7080ES(V1.0R).pdf
Date
2/15/2018
File Size
1.09 mb
Filename: Italian_TEG-7080ES(V1.0R).pdf
Date
2/15/2018
File Size
1.07 mb
Filename: UG_TEG-7080ES(v1).pdf
Date
1/2/2020
File Size
1.52 mb
PNG Image
File Size: 1.42 mb
Date: 2/15/2018
Download
PNG Image
File Size: 1.12 mb
Date: 2/15/2018
Download
PNG Image
File Size: 1.00 mb
Date: 2/15/2018
Download
Standards | - IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3az
- IEEE 802.3an
- IEEE 802.3bz
|
Device Interface | - 8 x 10GBASE-T (10Gbps, 5Gbps, 2.5Gbps, 1Gbps, 100Mbps)
- 1 x RJ-45 console port
- LED indicators
- LED on/off button
- Reset button
|
Data Transfer Rate | - Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit Ethernet: 2Gbps (full duplex)
- 2.5 Gigabit Ethernet: 5Gbps (full duplex)
- 5 Gigabit Ethernet: 10Gbps (full duplex)
- 10 Gigabit Ethernet: 20Gbps (full duplex)
|
Performance | - Switch fabric: 160Gbps
- RAM buffer: 2MB
- MAC Address Table: 16K entries
- Jumbo Frames: 9KB
- Forwarding rate: 119Mpps (64-byte packet size)
|
Management | - CLI (Console) for IP address settings and password configuration only
- HTTP / HTTPS (SSL v2/3 TLS 1.2) web based GUI
- Enable/disable 802.3az Power Saving
- Cable diagnostic test
- IPv6: IPv6 Static IP
|
Link Aggregation | - Static link aggregation and 802.3ad dynamic LACP (Up to 4 groups)
|
Quality of Service (QoS) | - 802.1p Class of Service (CoS)
- Bandwidth Control per port
- Queue Scheduling: Strict Priority (All-High-Before-Low), Weighted Round Robin (WRR)
|
VLAN | - 802.1Q Tagged VLAN
- Asymmetric VLAN
- Up to 16 VLAN groups, ID Range 1-4094
|
Multicast | |
Port Mirror | |
Access Control | - Loopback Detection
- Trusted Host/IP Access List
|
Power | - Input: 100 – 240V AC, 50/60Hz, internal power supply
- Max. Consumption: 28.5W
|
Smart Fan / Acoustics | - Quantity: 2 (Hot swappable)
- Noise Level: 39.5 dBA (max.)
|
MTBF | |
Operating Temperature | - 0° – 50° C (32° – 122° F)
|
Operating Humidity | |
Dimensions | - 330 x 230 x 44mm (13 x 9 x 1.73 in.)
- Rack mountable 1U height
|
Weight | |
Certifications | |
Warranty | |
PACKAGE CONTENTS |
- TEG-7080ES
- Quick Installation Guide
- Power cord
- RJ-45 to RS-232 console cable (1 m / 3.28 ft.)
- Rackmount kit
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.