Search FAQs
Browse by Product
I setup my internet connection type and saved it, but I still can not get the Internet from my PC. Why?
FAQ ID: 337 Product: TW100-BRV204Updated:2/3/2005 11:01:53 AM
Option 1: Please go to Status section from the configuration page, click on Connection Detail button. Click on Release/Renew button to allow the Router to regain fresh connection from your ISP. Then try browsing a website such as https://www.TRENDnet.com again with your Internet browser.
Option 2: Please power down all the equipments including Cable/DSL modem, Router and your PC. Then power on the Cable/DSL modem first and wait for 60 seconds, and power on the Router then your PC. This simple power cycle normally helps the Router to work with your Internet connection. Then try browsing a web site such as https://www.TRENDnet.com again with your internet browser.
Option 2: Please power down all the equipments including Cable/DSL modem, Router and your PC. Then power on the Cable/DSL modem first and wait for 60 seconds, and power on the Router then your PC. This simple power cycle normally helps the Router to work with your Internet connection. Then try browsing a web site such as https://www.TRENDnet.com again with your internet browser.
Related FAQs:
- How do I configure a VPN tunnel when one side has a dynamic IP address?
- How do I connect using a the Microsoft VPN Client?
- How do I forward ports in my TW100-BRV204/304?
- How do I configure a VPN tunnel with both sides having static IP addresses?
- I specified the IP address, 192.168.0.1 in my internet browser, but the bowser comes back with "The page cannot be displayed". How can I get into the TW100-BRV204 web configuration page?
Attachments:
No attachments found.