Search FAQs
Browse by Product
I set up my Internet Connection Type and saved it, but I still cannot access the Internet with my PC. What should I do?
FAQ ID: 340 Product: TW100-BRV304Updated:2/3/2005 11:04:03 AM
Option 1: Go to the Status section of the configuration page, and click the Connection Detail button. Click the Release/Renew button to allow the Router to refresh your connection. Then, try accessing a website such as https://www.TRENDnet.com with your web browser.
Option 2: Turn off your Cable/DSL modem, Router, PC. Then, turn on the Cable/DSL modem and wait for 60 seconds. Next, turn on the Router, wait 60 seconds, and turn on your PC. This simple power cycle normally helps the Router connect to your Internet connection. Then, try accessing a website such as https://www.TRENDnet.com with your web browser.
Option 2: Turn off your Cable/DSL modem, Router, PC. Then, turn on the Cable/DSL modem and wait for 60 seconds. Next, turn on the Router, wait 60 seconds, and turn on your PC. This simple power cycle normally helps the Router connect to your Internet connection. Then, try accessing a website such as https://www.TRENDnet.com with your web browser.
Related FAQs:
- When I attempt to access http://192.168.0.1 with my web browser, an error message tells me "The page cannot be displayed." How can I get into the TW100-BRV304 web configuration page?
- How do I connect using a the Microsoft VPN Client?
- How do I configure a VPN tunnel with both sides having static IP addresses?
- How do I configure a VPN tunnel when one side has a dynamic IP address?
- How do I forward ports in my TW100-BRV204/304?
Attachments:
No attachments found.