Search FAQs
Browse by Product
FAQ Home Page > PoE > Switches > TPE-1021WS
Browse TPE-1021WS Questions
There are 5 questions found in this category:

  1. Where would I find management login information for this switch?
    You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
  2. How do I reset the switch to factory default settings?
    Only managed or web smart PoE Switches will have reset instruction. Unmanaged PoE Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or ...
  3. Why can I only get internet on one device with this switch?
    A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
  4. What is a PoE budget and how much does this switch have?
    Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TPE-1021WS power budget is 130W....
  5. Which PoE standards are supported and should I be concerned about voltage?
    The TPE-1021WS supports IEEE 802.3af and 802.3at PoE standards. TRENDnet PoE Switches typically support IEEE industry standards. Please check detailed product specifications under the Product section of our website. If your device is not IEEE PoE compliant it may not be compatible with TRENDnet PoE ...