Search FAQs
Browse by Product
FAQ Home Page > Powerline > WiFi Powerline > TPL-410AP
Browse TPL-410AP Questions
There are 6 questions found in this category:

  1. How do I change my SSID and password?
    Assign a static IP address to your computer's network adapter in the subnet of 192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used ...
  2. What are the default settings for the TPL-410AP?
    For added security, the TPL-410AP is preconfigured with a unique wireless password.  The default settings are located on a sticker on the plastic wrap on the unit and on the back label. ...
  3. How do I sync the TPL-410AP to my existing Powerline Network?
    Press and hold the sync button for 2 seconds and you will see the power LED start to blink. Go the one of remotes units and press the sync button for 2 seconds....
  4. How do I log in to the TPL-410AP?
    Assign a static IP address to your computer's network adapter in the subnet of 192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used...
  5. How do I change my default encryption key using the Powerline Utility?
    Plug in your TPL-410AP adapters then connect your computer in to one of the devices. Open the utility and click PLC Network > Device Setup and change Private Network Name. Once you have changed the Private Network Name click Set Local Device. Repeat for additional adapters. ...
  6. How do I reset the TPL-410AP?
    Press and hold the reset button on the side of the unit for 10 seconds then release. ...