Search FAQs
Browse by Product
FAQ Home Page > Wired > Adapters > TEG-PCBUSR
Browse TEG-PCBUSR Questions
There are 3 questions found in this category:

  1. After successful installation of the TEG-PCBUSR Gigabit Ethernet PC Card adapter, I connected a CAT-5 cable into the PC Card's RJ-45 connector, but it doesn't seem to work. What should I do?
    Check and verify that the other end of the CAT-5 cable is connected to your switch, router, or RJ-45 jack. After that has been checked and verified, double-check and make sure your TEG-PCBUSR PC Card is inserted all the way to the end of your notebook's slot....
  2. Why can't my notebook reach 1000 Mbps when I configure my TEG-PCBUSR to 1000Mbps Full Duplex?
    Connect your notebook into a Gigabit Switch and see if the "Speed" LED turns green.
  3. Why is the "Speed" LED off, but my "Link/Act" LED on?
    If you have installed the TEG-PCBUSR driver and have verified its proper installation, then your computer is connected to a network that operates at 10Mbps. Please consult the User's Guide for LED indicators. ...