skip to main content
Click to change country
Search FAQs
Browse by Product
FAQ Home Page > Wired > Routers > TW100-BRF114
Browse TW100-BRF114 Questions
There are 10 questions found in this category:

  1. How do I forward ports in my TW100-BRF114?
    Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Put a check mark in the Enable box. Rename the se...
  2. Where can I find the MAC Address of my TW100-BRF114?
    The MAC Address can be found on a label on the bottom of the router. You can alternately find it by doing the following: Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) ...
  3. How do I configure the TW100-BRF114?
    Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel 1. Double-Click on the Network Connection icon. 2. Right-Click on the Local Area Connection icon then click on Properties. 3. Highlight the Internet Pr...
  4. How do I change the IP Address of my TW100-BRF114?
    Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Click on LAN on the left hand side. Change ...
  5. What is the default username and password for the TW100-BRF114?
    The default username & password for the TW100-BRF114 are both (blank). There is no username and password set by default....
  6. What is the default IP address of my TW100-BRF114?
    The default IP address for the TW100-BRF114 is 192.168.0.1.
  7. What can I do if I forgot my password or want to reset back to factory defaults?
    Locate the reset button on the back of the TW100-BRF114. Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration. ...
  8. How do I change the username & password on my TW100-BRF114?
    Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. 1) Click on Password on the left hand side. 2...
  9. How do I configure the TW100-BRF114 for a Cable connection using a Dynamic IP Address?
    Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address. Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (b...
  10. How do I configure the TW100-BRF114 for a DSL, PPPoE connection?
    Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Click on Advanced then WAN Port on the left hand si...