skip to main content
Click to change country
Search FAQs
Browse by Product
FAQ Home Page > Wired > Routers > TW100-BRF114U
Browse TW100-BRF114U Questions
There are 17 questions found in this category:

  1. How do I install my printer on Windows 2000/XP?
    Step 1 Go to Start>Settings>Printers>Add New Printer (WinXP - Start>Printers and Faxes>Add a Printer). Step 2 Select Local Printer. Make sure to uncheck Automatically detect and install my plug and play printer. Click Next. Step 3 Select Create a New Port and select S...
  2. How do I install my printer on Windows 95/98/ME?
    In Windows 98/Me you will need to install the LPR client. For Windows 98/ME you will also need to know the port name that you are printing to (The Port Name is L1. Installing LPR: Step 1 Once the file is downloaded and extracted, Go to Start > Settings > Control Panel > doubl...
  3. What is the port name that I use when installing a printer?
    The port name is "L1", without the quotes and it is case sensitive.
  4. How do I forward ports in my TW100-BRF114U?
    Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Put a check mark in the Enable box. Rename the serv...
  5. Where can I find the MAC Address of my TW100-BRF114U?
    The MAC Address can be found on a label on the bottom of the router. You can alternately find it by doing the following: 1. Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (bla...
  6. How do I configure the TW100-BRF114U?
    Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel. 1. Double-Click on the Network Connection icon. 2. Right-Click on the Local Area Connection icon then click on Properties. 3. Highlight the Internet P...
  7. How do I change the IP Address of my TW100-BRF114U?
    1. Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. 2. Click on LAN on the left hand side. 3...
  8. What is the default username and password for the TW100-BRF114U?
    The default username & password for the TW100-BRF114U are both (blank). There is no username and password set by default....
  9. What is the default IP address of my TW100-BRF114U?
    The default IP address for the TW100-BRF114U is 192.168.0.1.
  10. What can I do if I forgot my password or want to reset back to factory defaults?
    1. Locate the reset button on the back of the TW100-BRF114U. 2. Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration. ...
  11. How do I change the username & password on my TW100-BRF114U?
    A: Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. 1. Click on Password on the left hand side. ...
  12. How do I configure the TW100-BRF114U for a Cable connection using a Dynamic IP Address?
    A: Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address. 1. Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and pass...
  13. How do I configure the TW100-BRF114U for a DSL, PPPoE connection?
    Open your web browser and type the IP address of the TW100-BRF114U in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel. Click on Advanced then WAN Port on the left hand...
  14. I'm trying to configure the Print Server to work with my printer, but the "Add Port" utility is unable to find my printer. What should I do?
    First, verify that the Printer LED on the TW100-BRF114U is lit. If it isn't, ensure that both your printer and the TW100-BRF114U are turned on and that the USB cable is securely connected to the connectors on both devices. Then, try bro...
  15. I set up my internet connection type and saved it, but I still cannot connect to the Internet. What should I do?
    Option 1: Click the Status button on the TW100-BRF114U's main configuration page. On the Status page, click the Connection Detail button. Click the Release/Renew button to allow the router to refresh the connection to your ISP. Then, try browsing a website such as https://www.TRENDnet.com again with...
  16. I am not sure what type of Internet Account Type I have for my Cable/DSL connection. How do I find out?
    You can simply contact your Internet Service Provider's (ISP) Customer Service or Technical Support Department for the correct information. ...
  17. I specified the IP address "192.168.0.1" in my web browser, but an error message says "The page cannot be displayed." How can I get into the TW100-BRF114U web configuration page?
    Please verify your hardware and TCP/IP settings again by following the instructions in sections 2-3, and make sure the Power, WAN, and the LAN lights on the AP/Router's front panel are on. Then, try accessing 192.168.0.1 again using your web browser. ...