![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d01_2-(mirror).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d02_2-(standing).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d03_2-(topx).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d04_2-(bottom).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d05_2-(carrying-case).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d01_2-(mirror).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d02_2-(standing).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d03_2-(topx).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d04_2-(bottom).png)
![RB-TC-NT3](/images/products/photos/TC-NT3/TC-NT3_d05_2-(carrying-case).png)
TRENDnet's VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case.
![](/images/products/icons/features/gigabit_ports.png)
Cables and Ports
Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables
![](/images/products/icons/features/PINtest.png)
PIN Tests
Identifies proper, severed, short circuit, and cross connected pins
![](/images/products/icons/features/JumboFrame.png)
TX/RX Troubleshooting
Displays separate TX and RX results for more efficient troubleshooting
![](/images/products/icons/features/LocalRemote.png)
Local and Remote Testing
A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit
![](/images/products/icons/features/APscan.png)
Continuous Scan
Continuous scan mode is design to accommodate testing with cable ends in different locations
![](/images/products/icons/features/manualScan.png)
Manual Scan
Manual scan is well suited for loop back cable testing
![](/images/products/icons/features/autoLogout.png)
Quick Test Mode
Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type
![](/images/products/icons/features/RackMountable.png)
Blinking Hub/Switch Mode
Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port's LED indicator to blink
![](/images/products/icons/features/300Mdistance.png)
Cable Distance
Tests cables lengths of up to 300 meters (1,000 ft.)
![](/images/products/icons/features/song.png)
Tone Generator
Compatible with TRENDnet's TC-TP1, Network Probe, to trace cables using two selectable tones
Test Pin Configuration |
|
Transmitter Unit Interface |
|
Remote Unit Interface |
|
Compatible Cables* |
|
Tone Frequency |
|
Special Features |
|
Power Source |
|
Operating Temperature |
|
Operating Humidity |
|
Certifications |
|
Dimensions |
|
Weight |
|
Warranty |
|
PACKAGE CONTENTS |
|