skip to main content
TRENDnet Store
Click to change country

24-port 10/100Mbps NWay Switch (Rack Mount)

TE100-S24plus

  • This 24 port high performance auto-sensing N-way switch automatically negotiates between 10Base-T and 100Base-TX network speeds
  • It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths
  • This rack mount switch provides a 5-year warranty
DISCONTINUED PRODUCT
The TE100-S24plus  has been discontinued. It has been replaced by the TEG-S24g (Version V3). For a list of discontinued products, click here.

TRENDnet's TE100-S24plus is a high performance, auto-sensing 24-port NWay rack-mountable Fast Ethernet Switch. It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths. With 10/100Mbps NWay technology, the TE100-S24plus automatically negotiates between 10Base-T and 100Base-TX network speeds, as well as half and full duplex modes. The TE100-S24plus also has a module bay for optional multimode SC type fiber module that allows connection to another fiber device up to 2Km away (in full-duplex mode). The auto MDI-II/MDI-X detection on each port automatically detects and corrects for crossover connection and allows direct switch-to-switch or switch-to-hub connection for your networking needs.

The diagram illustrates a network setup with various devices connected through different types of connections. The main components include two switches labeled TE100-S16plus and TE100-S24plus. The TE100-S16plus switch connects to servers with TE100-PCIs, a TW100-W1CA, a DSL/Cable Modem, and printers. The TE100-S24plus switch connects to servers with TE100-PCAs, a TE100-PCIWN, a modem/router, and printers. Both switches are connected to workstations with TE100-PCIWNs and TE100-PCIEs. The connections are color-coded to indicate different speeds: orange lines represent 100Mbps Fiber, blue lines represent 100Mbps, and black lines represent 10Mbps. The diagram also includes TE100-DXIs, TE100-CXEs, and TE100-S16plus devices connected to various workstations and servers.
  • 24 10/100Mbps NWay Auto MDI-II/MDI-X ports
  • Integrate address Look-Up Engine, supports up to 4K absolute MAC address
  • 768KB internal RAM for frame buffering
  • Full/half duplex transfer mode for each port
  • Wire-speed filtering/forwarding rates
  • IEEE 802.3x flow control for full-duplex mode
  • Back pressure flow control for half-duplex mode
  • Store-and-forward switching method
  • Extensive front-panel diagnostic LEDs
  • One module bay for optional one-port 100Base-FX multimode SC type fiber connection
  • 5-year limited warranty
Hardware
Standards:
  • IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX/100Base-FX ANSI/IEEE 802.3 NWay auto-negotiation
Connectors:
  • 24 10/100Mbps shielded RJ45 Auto MDI-II/MDI-X ports
Network Cables:
  • CAT 3, 4, 5 UTP/STP for 10Base-T;
  • CAT 5 UTP/STP for 100Base-TX 62.5/125mm multimode fiber-optic with SC type connector (412 m in half-duplex mode, 2 Km in full-duplex mode)
Protocols:
  • CSMA/CD
Data Transfer Rate:
  • Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
  • Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex)
Data RAM Buffers:
  • 768KB per device
Filtering Address Table:
  • 4K entries per device
Internal Power Adapter:
  • 100~240 VAC, Universal Power Supply
Diagnostic LEDs:
  • Power, Link/Act, FDX/COL, 100Base-FX
Dimensions:
  • 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inch) (W x H x D)
Temperature:
  • Operating: -10° ~ 50°C (14 ~ 122°F)
  • Storage: -10° ~ 70°C (14° ~ 158°F
Humidity:
  • Operating: 10% ~ 90% RH
  • Storage: 5% ~ 90% RH
Emission:
  • FCC Class A, CE Mark A, VCCI-A

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in