ISDN Ethernet Router with S/T Interface with Built-in 6-port 10Mbps Hub
TW-H6W1IR
DISCONTINUED PRODUCT
The TW-H6W1IR has been discontinued.
It has been replaced by the TWG-431BR (Version V1).
For a list of discontinued products, click here. The TW-H6W1IR is a multi-function ISDN router that has 6 built-in Ethernet hub ports, which provides small and home office users an all-in-one solution for Internet connection. The built-in hub feature saves users the time and trouble of purchasing and installing a separate hub by allowing 6 separate workstations to directly connect to the ISDN router. The password protection for the system management terminal, PAP, CHAP, and MS-CHAP protocols are supported for remote access users. Also, the TW-H6W1IR is concentrated on easy-of-use, Internet/WAN security, and the cost-effective use of ISDN services. Local and remote Telnet allows simple setup and troubleshooting.
- 6 Ethernet LAN ports (1 ISDN port + 2 RJ-11 ports)
- 128Kbps BRI ISDN TA support over a single ISDN line
- Bandwidth-on-demand with BAP/BACP
- PAP/CHAP/RADIUS, Caller ID, NAT, TCP/IP, DHCP support
- Internet access with single ISP account
- Dial-on-demand to place a call to the remote site automatically
- Network Address Translator enables simultaneous use of one IP address
- Firewall protection, PPP/MP security
- LAN-to-LAN enterprise connections
- Remote dial-in server support
- Control local and remote console via Telnet
- SNMP manageable
- ISDN S/T interface support
- Flash memory for firmware upgrade
- Setup utility for easy configuration
- 5-year limited warranty
Hardware | |
LAN Standard: | IEEE 802.3 10Base-T Ethernet |
---|---|
LAN Protocol: | CSMA/CD |
LAN Speed: | 10Mbps (half-duplex) |
LAN Ports: | 6 UTP/STP RJ-45 10Base-T Ethernet ports |
Communication Ports: |
|
Network Cables: | 2-pair UTP CAT 3, 4, 5, (100m) for 10Base-T, EIA/TIA-568 100-ohm Screened Twisted Pair (STP) |
LEDs: | Power, Test, ISDN (LINK, B1/B2), Ethernet (Link/Act, Col), and Phone 1, 2 |
ISDN Speed: | ISDN BRI up to 128Kbps |
ISDN Protocol: | PPP/Multi-link PPP |
Power Supply: | 18V/750mA through external DC power adapter |
Power Consumption: | 8.5 W max. |
Dimensions: | 220 x 166 x 45 mm (8.7 x 6.5 x 1.8 inches) |
Weight: | 739 g (1.6 lbs.) |
Temperature: |
|
Humidity: | 5 % to 95 % non-condensing |
Certifications: | FCC, VCCI, CE 0682 X, UL, CSA |
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
Not Available in