skip to main content
TRENDnet Store
Click to change country

22-port 10/100Mbps Management Stackable Master Switch with Optional Gigabit Ethernet

TEG-S224M

  • The full-duplex gigabit switch brings high bandwidth with 2000Mbps speed
  • Expandable up to 94 10/100Base-TX ports and two gigabit ports
  • Provides the benefit of extensive and simple management through SNMP, HTTP, and four RMON groups
DISCONTINUED PRODUCT
The TEG-S224M  has been discontinued. For a list of discontinued products, click here.

The TEG-S224M is a high-capacity management stackable Fast Ethernet master switch that provides the scalability and flexibility to deploy a cost-effective network environment. The TEG-S224M has three slots. Slot 1 is a 2-port 10/100Base-TX module (switched), which it can be replaced with either a 2-port 100Base-FX (MT-RJ) module (optional) or a 1-port 100Base-FX (SC) module (optional). Slot 2 is dedicated for a 3-port stacking module (optional extension port). Slot 3 provides an optional 1 or 2-port 1000Base-SX (SC) Gigabit Ethernet module. The TEG-S224M stacks with up to three TEG-S224S. Using the optional switched modules, they support a maximum configuration of 94 10/100Mbps Ethernet/Fast Ethernet ports and two Gigabit Ethernet ports.

  • Complies with IEEE 802.3, IEEE 802.3µ, IEEE 802.1p/Q, IEEE 802.3x standards
  • 22 N-way auto-negotiation UTP/STP ports
  • Port-based VLAN
  • Half- and full-duplex modes
  • Store-and-forward switching method
  • Data filtering eliminates bad packets and runts
  • Back-plane bandwidth up to 21.32Gbps
  • Supports IEEE 802.1d Spanning Tree Protocol
  • 12K MAC address table per device
  • IEEE 802.1q VLAN tagging and extended Port/MAC based VLAN
  • Integrated flow control
  • Port aggregation support
  • IGMP snooping - Multimedia Applications support
  • Broadcast Storm Filtering monitors the broadcast traffic
  • Console or Telnet configuration
  • Flash memory for software upgrade
  • Web-based network management to monitor and configure the device
  • Front panel port status LEDs
  • EIA-19 rack mountable
  • 5-year limited warranty
Hardware
Standards:
  • IEEE 802.3, IEEE 802.3µ, IEEE 802.1p/Q, IEEE 802.3x, IEEE 802.3z
Protocol:
  • CSMA/CD
Switching Method:
  • Store-and-forward
Management Protocols:
  • SNMP, Web-based Management, RMON, Java Management Application, Telnet, MIBs (MIB-II, Bridge, RMON, and VLAN), Local and remote out-of-band management
Cabling:
  • CAT 3, 4, 5 UTP/STP RJ-45 for 10Mbps, 100 meter max.;
  • CAT 5 UTP/STP RJ-45 for 100Mbps, 100 meter max.; multimode SC-type fiber, 2 km max.; multimode MT-RJ type fiber, 2 km max.
  • For Gigabit connection: Multimode Fiber 50/125 micron-meter, 525 Meter max.; Multimode Fiber 62.5/125 micron-meter, 275 Meter max.
Console Port:
  • 9 pin-male, D-type EIA-232 port
LEDs:
  • Per Device: Power, Console, Slot, Stacking Port, Gigabit Port
  • Per Port: 100M, Link/Act
Power:
  • 100-240 VAC, 50/60Hz, 46Watt max.
Dimensions:
  • 441 x 367 x 44 mm / 17.3 x 8.0 x 1.7 inches
Weight:
  • 5 kg / 11 lbs.
Temperature:
  • Operating: 0° to 50° C / 32° to 122° F
Humidity:
  • 5 % to 95 % non-condensing
Certifications:
  • FCC, CE, VCCI Class A, C-tick, BCIQ

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.