skip to main content
TRENDnet Store
Click to change country

24-port 10/100Mbps NWay Switch (Rack Mount)

TE100-S24plus

  • This 24 port high performance auto-sensing N-way switch automatically negotiates between 10Base-T and 100Base-TX network speeds
  • It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths
  • This rack mount switch provides a 5-year warranty
DISCONTINUED PRODUCT
The TE100-S24plus  has been discontinued. It has been replaced by the TEG-S24g (Version v3.0R). For a list of discontinued products, click here.

TRENDnet's TE100-S24plus is a high performance, auto-sensing 24-port NWay rack-mountable Fast Ethernet Switch. It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths. With 10/100Mbps NWay technology, the TE100-S24plus automatically negotiates between 10Base-T and 100Base-TX network speeds, as well as half and full duplex modes. The TE100-S24plus also has a module bay for optional multimode SC type fiber module that allows connection to another fiber device up to 2Km away (in full-duplex mode). The auto MDI-II/MDI-X detection on each port automatically detects and corrects for crossover connection and allows direct switch-to-switch or switch-to-hub connection for your networking needs.

The diagram illustrates a network setup with various devices connected through different types of connections. The main components include two switches labeled TE100-S16plus and TE100-S24plus. The TE100-S16plus switch connects to servers with TE100-PCIs, a TW100-W1CA, a DSL/Cable Modem, and printers. The TE100-S24plus switch connects to servers with TE100-PCAs, a TE100-PCIWN, a modem/router, and printers. Both switches are connected to workstations with TE100-PCIWNs and TE100-PCIEs. The connections are color-coded to indicate different speeds: orange lines represent 100Mbps Fiber, blue lines represent 100Mbps, and black lines represent 10Mbps. The diagram also includes TE100-DXIs, TE100-CXEs, and TE100-S16plus devices connected to various workstations and servers.
  • 24 10/100Mbps NWay Auto MDI-II/MDI-X ports
  • Integrate address Look-Up Engine, supports up to 4K absolute MAC address
  • 768KB internal RAM for frame buffering
  • Full/half duplex transfer mode for each port
  • Wire-speed filtering/forwarding rates
  • IEEE 802.3x flow control for full-duplex mode
  • Back pressure flow control for half-duplex mode
  • Store-and-forward switching method
  • Extensive front-panel diagnostic LEDs
  • One module bay for optional one-port 100Base-FX multimode SC type fiber connection
  • 5-year limited warranty
Hardware
Standards:
  • IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX/100Base-FX ANSI/IEEE 802.3 NWay auto-negotiation
Connectors:
  • 24 10/100Mbps shielded RJ45 Auto MDI-II/MDI-X ports
Network Cables:
  • CAT 3, 4, 5 UTP/STP for 10Base-T;
  • CAT 5 UTP/STP for 100Base-TX 62.5/125mm multimode fiber-optic with SC type connector (412 m in half-duplex mode, 2 Km in full-duplex mode)
Protocols:
  • CSMA/CD
Data Transfer Rate:
  • Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
  • Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex)
Data RAM Buffers:
  • 768KB per device
Filtering Address Table:
  • 4K entries per device
Internal Power Adapter:
  • 100~240 VAC, Universal Power Supply
Diagnostic LEDs:
  • Power, Link/Act, FDX/COL, 100Base-FX
Dimensions:
  • 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inch) (W x H x D)
Temperature:
  • Operating: -10° ~ 50°C (14 ~ 122°F)
  • Storage: -10° ~ 70°C (14° ~ 158°F
Humidity:
  • Operating: 10% ~ 90% RH
  • Storage: 5% ~ 90% RH
Emission:
  • FCC Class A, CE Mark A, VCCI-A

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.