skip to main content
TRENDnet Store
Click to change country

16-port 10/100Mbps NWay Switch (Rack Mount)

TE100-S16plus (Version 1.0)

DISCONTINUED PRODUCT
The TE100-S16plus (Version 1.0) has been discontinued. It has been replaced by the TEG-S16Dg (Version v2.1R). For a list of discontinued products, click here.

TRENDnet's TE100-S16plus is a high performance, auto-sensing 16-port NWay rack-mountable Fast Ethernet Switch. It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths. With 10/100Mbps NWay technology, the TE100-S16plus automatically negotiates between 10Base-T and 100Base-TX network speeds, as well as half and full duplex modes. The TE100-S16plus also has a module bay for optional multimode SC type fiber module that allows connection to another fiber device up to 2Km away (in full-duplex mode). Supporting "Port Trunking" and Quality of Service (QoS), TRENDnet's TE100-S16plus is the perfect solution for network backbone and multimedia applications.

  • 16 10/100Mbps NWay half/full duplex MDI-X ports
  • One Uplink port (shared) with port 8
  • Integrate address Look-Up Engine, supports up to 16K absolute MAC address
  • Support three QoS levels; checked via IP Header, 802.1Q VLAN Tag, and/or selected per-port basis
  • Supports trunking function; max. of 8 trunk ports are available with max. 1.6Gbps trunking bandwidth
  • 512KB internal RAM for frame buffering § Wire-speed filtering/forwarding rates
  • IEEE 802.3x flow control for full-duplex mode; Back pressure flow control for half-duplex mode
  • Store-and-forward switching method
  • Extensive front-panel diagnostic LEDs
  • One module bay for optional one-port 100Base-FX multimode SC type fiber connection
  • 5-year limited warranty
Hardware
Standards:
  • IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX/100Base-FX ANSI/IEEE 802.3 NWay auto-negotiation
Connectors:
  • 16 10/100Mbps shielded RJ45 ports; one MDI-II Uplink port shared with port 8
Network Cables:
  • CAT 3, 4, 5 UTP/STP for 10Base-T; CAT 5 UTP/STP for 100Base-TX 62.5/125mm multimode fiber-optic with SC type connector (412 m in half-duplex mode, 2 Km in full-duplex mode)
Protocols:
  • CSMA/CD
Data Transfer Rate:
  • Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
  • Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex)
Data RAM Buffers:
  • 512Kbytes per device
Filtering Address Table:
  • 16K entries per device
Internal Power Adapter:
  • 100~240 VAC, Universal Power Supply
Diagnostic LEDs:
  • Power, FX, Link/Act, FDX/COL
Dimensions:
  • 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inch) (W x H x D)
Temperature:
  • Operating: -10° ~ 50°C (14° ~ 122°F)
  • Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity:
  • Operating: 10% ~ 90% RH
  • Storage: 5% ~ 90% RH
Emission:
  • FCC Class A, CE Mark A, VCCI-A

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in