skip to main content
TRENDnet Store
Click to change country

Power over Ethernet (PoE) Splitter

TPE-104S (Version v1.0R)

  • Used to install a non-PoE device in remote locations
  • Splits a networked PoE signal into separate power and data sources
  • Set the output power to either 5V, 7.5V, 9V, or 12V
  • Use this compact device with TRENDnet PoE switches or injectors
  • Save on installation and equipment costs
DISCONTINUED PRODUCT
The TPE-104S (Version v1.0R) has been discontinued. For a list of discontinued products, click here.

The Power over Ethernet Splitter, model TPE-104S, is used to install non-PoE devices in remote locations. It splits a networked PoE signal into separate power and data sources. Run an Ethernet cable from a PoE switch (or injector) for distances up to 100 meters and then split the PoE signal into separate data and power sources in order to network a non-PoE device.

No need to install non-PoE devices near a power outlet. Save installation and equipment cost when installing access points, IP cameras, and more in a remote location. A handy toggle switch adjusts output power to 5V, 7.5V, 9V, or 12V in order to match non-PoE device power requirements. This compact splitter safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network.

The Power over Ethernet PoE Splitter TPE-104S by TRENDnet, with PoE distance up to 100 meters using Cat. 5e Cable, includes data-only and power-only options, an 8-Port 10/100Mbps PoE Switch TPE-S44, and a Wireless N Internet Camera TV-IP551W, with 10/100Mbps power PoE.
  • Converts non-PoE devices with Power over Ethernet support
  • 1 x 10/100Mbps PoE Auto-MDIX Data In port
  • 1 x 10/100Mbps Auto-MDIX Data Out port
  • Power out port
  • 1 x 33cm (13”) jumper cable with a 2.0mm connection to the splitter and 2.0mm pin connection to powered device
  • 1 x 33cm (13”) jumper cable with a 2.0mm connection to the splitter and 2.5mm pin connection to powered device
  • For a product with a 1mm pin power connection, use TRENDnet's TV-JC35 (3.5mm to 1mm Jumper Cable-sold separately)
  • Power LED indicator
  • Install non-PoE devices where a power outlet is not available
  • Reduce installation and network equipment costs
  • Safeguards network device with short circuit protection
  • Adjustable output DIP switch 5V, 7.5V, 9V, and 12V adjustable output
  • Auto-sensing power drawn from 802.3af power source equipment(PSE) devices
  • Supplies power up to 15.4 Watts
  • Light weight and compact size
  • Wall mounting points
  • 3-year limited warranty
Hardware
Standard
  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-TX
  • IEEE 802.3x Flow Control
  • IEEE 802.3af Power over Ethernet
Network Media
  • 10Mbps: UTP/STP Cat. 5 Up to 100 meters
  • 100Mbps: UTP/STP Cat. 5 and 5e Up to 100 meters
Ports
  • 1 x 10/100Mbps Data and Power In
  • 1 x 10/100Mbps Data Out
  • 1 x 5.5mm pin Power Out
Switch
  • Adjustable output power DIP switch (5V, 7.5V, 9V, 12V)
Power
  • Power In: 48VDC 0.38A
  • Power Out: 5V(2A), 7.5V(2A), 9V(1.7A), 12V(1.2A)
Power Consumption
  • Max. 0.3 watt
Jumper Cable
  • 1 x (2.0 x 2.0mm)
  • 1 x (2.5 x 2.0mm)
Dimensions
  • 70 x 45 x 25 mm (2.75 x 1.8 x 1 in.)
Weight
  • 45g (1.6 oz.)
Temperature
  • Operation: 0°C~45°C (32°F~ 113°F)
  • Storage: -20°C~90°C (-4°F~194 °F)
Humidity
  • Max. 90% (non-condensing)
Certifications
  • CE, FCC

PACKAGE CONTENTS
  • TPE-104S
  • Quick Installation Guide
  • 2 x Jumper Cable (2.0 x 2.0mm, 2.0 x 2.5 mm)

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in