TRENDnet's Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit PoE+ signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE and PoE+ devices. Connect the injector to a non-PoE Gigabit switch and then run an Ethernet cable with data + power to network a PoE or PoE+ device up to 100 meters (328 ft.) away.

PoE
Supplies a PoE device with PoE (15.4W) or PoE+ (30W) power.

Installation Flexibility
Wall-mountable design accommodates most installations scenarios.

Gigabit Speeds
Full Duplex 2Gbps Ethernet speeds with this PoE+ injector.
Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3af
- IEEE 802.3at
|
Device Interface | - 1 x Gigabit Data in port
- 1 x Gigabit Data & Power out port
- LED indicators
|
Special Features | |
Data Transfer Rate | - Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit: 2000Mbps (full duplex)
|
PoE Delivery | - Pin 1, 2 for power+ and pin 3, 6 for power- (mode A)
|
Power | - Input: 100~240V AC, 50/60Hz, 0.6A max.
|
Power Consumption | |
Operating Temperature | |
Operating Humidity | |
Dimensions | - 155 x 57 x 33mm (6.1 x 2.3 x 1.3 in.)
|
Weight | |
Certifications | |
Warranty | |
PACKAGE CONTENTS |
- TPE-115GI
- Quick Installation Guide
- Power cord
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.