Installers and integrators can save on equipment costs and reduce installation time with TRENDnet’s Unmanaged Gigabit PoE+ Switches. These gigabit PoE+ switches deliver up to 30W per port of PoE power, and data over your existing Ethernet cables. With PoE technology, users only need one set of cables to deliver both power and data.
The new fanless design reduces unnecessary energy consumption and eliminates disruptive operating noise. Easily connect and network your PoE and PoE+ devices, such as high-power wireless access points, PTZ and other advanced IP cameras, VoIP phone systems, IPTV decoders, and access controls, to reliable TRENDnet’s gigabit PoE+ switches.
Features a 120W total PoE power budget, and supplies 16 Power over Ethernet devices with up to 30W per port.
With high-speed gigabit ports and a full switching capacity, these switches are well-suited for the most demanding network applications.
Fanless PoE+ switch design lowers unnecessary energy consumption and eliminates disruptive operating noise.
No configuration needed, simply connect PoE+ network devices to the PoE+ switch
Supplies up to 30W of power per port with data over a single Ethernet cable to PoE and PoE+ devices
Equipped with 16 high-speed gigabit PoE+ ports and a full switching capacity, these switches are well-suited for the most demanding networking applications
Fanless PoE+ switch design lowers energy consumption and eliminates distracting operating noise
With a sturdy metal housing and included rackmount brackets, this PoE+ switch is designed for wall-mount or 19” 1U rack installations
Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)
Data RAM Buffer: 512KB
Switch Fabric: 32Gbps
MAC Address Table: 8K entries
Forwarding rate: 23.8Mpps (64-byte packet size)
Jumbo Frame: 10KB
Input: 100 – 240V AC, 50/60Hz, DC 54V/2.78A
Max. consumption: 12.8W (no PD)
PoE budget: 120W
PoE Mode A: Pins 1, 2, 3, and 6 for power
Over current protection
Short circuit protection
0° – 40° C (32° – 104° F)
Max. 90% non-condensing
287 x 128 x 27mm (11.3 x 5.04 x 1.06 in.)
908g (32 oz.)
Quick Installation Guide
Rack Mount Kit
Power brick (55V, 2.55A)
Power cord (1.5m / 4.9 ft.)
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.