skip to main content

Gigabit Power over Ethernet (PoE) Injector

TPE-111GI (Version v1.0R)

  • Use non-PoE switches to network PoE devices at distances of up to 100 meters (328 feet)
  • Save on installation and equipment costs
  • Create an integrated PoE and non-PoE Gigabit network
DISCONTINUED PRODUCT
The TPE-111GI (Version v1.0R) has been discontinued. It has been replaced by the TPE-113GI (Version v3.0R). For a list of discontinued products, click here.

The Gigabit Power over Ethernet Injector (TPE-111GI) combines electrical power with a Gigabit network data signal to product a Gigabit Power over Ethernet (PoE) signal.

Connect this device to a non-PoE switch and then run a Gigabit PoE cable for up to 100 meters (328 Ft.) to network most PoE devices.

No need to buy a PoE switch—use existing open ports from a non-PoE switch to network PoE devices. Save installation and equipment cost when installing TRENDnet PoE access points and IP cameras in remote locations. No need to install PoE devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds.

  • Power Over Ethernet (PoE) Injector for 10/100/1000T deliver power up to 100 meters (328ft)
  • Network devices at Gigabit speeds all within a compact device
  • Easy install PoE devices where a power outlet is not available
  • Reduce installation and network equipment costs
  • Safeguards network devices with short circuit protection
  • Plug and Play in remote location
  • Light weight and compact size
  • IEEE 802.3ab and 802.3af PoE compliant
  • Supplies Power to PD up to 15.5 Watts
  • 3-years limited warranty
Hardware

Standard

IEEE 802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab Gigabit Ethernet
IEEE 802.3af Power over Ethernet

Network Media

10Mbps: 2-pair UTP/STP Cat. 3, 4, 5; EIA/TIA-568,100-ohm Up to 100 Meters
100Mbps: 2-pair UTP/STP Cat. 5, 5E, EIA/TIA-568,100-ohm 6; Up to 100 Meters
1000Mbps: 2-pair UTP/STP Cat. 5, 5E, EIA/TIA-568,100-ohm 6; Up to 100 Meters

Protocol

CSMA/CD

Topology

Star

Ports

1 x DATA-IN Port (Data only)
1 x PoE-OUT Port (Data + Power)

Data Lines

Pair 1: Pin 1, 2
Pair 2: Pin 3, 6

Power

Input: Power supply: AC 100~240V, 50~60Hz, 0.3A
Output: Class 0, 48V DC @ 15.4 watts ; Class 1, 48V DC @ 4 watts; Class 2, 48V DC @ 7 watts ; Class 3, 48V DC @ 15.4 watts

Diagnostic LEDs

Power (Green)

Power Consumption

15.5 watts (max)

Temperature

Operation: 0°C~45°C (32°F~ 113°F)
Storage: -40°C~70°C (-40°F~158 °F)

Humidity

10%- 90% (non-condensing)

Dimensions (W x D x H)

115 x 57 x 35mm (4.5 x 2.2 x 1.4 in.)

Weight

175g (6oz.)

Certifications

CE, FCC


PACKAGE CONTENTS

  • TPE-111GI
  • Multi-Language user's Guide
  • Power Cord (1.2m/6.5ft, 48VDC, 0.5A)

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Not Available in