Expand your network’s bandwidth and reduce traffic bottlenecks with TRENDnet’s Unmanaged 2.5G PoE+ Switches. These 2.5G PoE+ switches come equipped with 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over your existing Cat5e or better cabling. Each high-speed 2.5G PoE+ switch features a durable metal enclosure and can be mounted to the wall for setup flexibility. The fanless design lowers energy consumption and eliminates distracting operating noise. TRENDnet’s reliable 2.5G PoE+ switches are cost-effective solutions to increase your network’s throughput. A 55W total PoE power budget on this PoE+ switch supplies up to four PoE+ devices with up to 30W per port.
Equipped with 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling.
The 2.5G PoE+ switches feature a metal housing with a convenient wall mountable design for greater installation flexibility.
A 55W total PoE power budget on this PoE+ switch supplies up to four PoE+ devices with up to 30W per port.
No configuration needed, simply connect network devices to the 2.5G PoE+ switch
A 55W total PoE power budget supplies up to four PoE+ devices with up to 30W per port
Equipped with 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling
Fanless design lowers energy consumption and eliminates operating noise
Sturdy metal housing
Features a convenient wall mountable design for greater installation flexibility
Sends larger packets, or Jumbo Frames (up to 12KB) for increased performance
LED indicators convey port status
4 x 2.5GBASE-T PoE+ ports (1Gbps/2.5Gbps)
1 x 2.5GBASE-T ports (1Gbps/2.5Gbps)
Data Transfer Rate
Gigabit: 2000 Mbps (full duplex)
2.5 Gigabit: 5Gbps (full duplex)
Data RAM Buffer: 1.5MB
Switch Capacity: 25Gbps
MAC Address Table: 16K entries
Forwarding rate: 18.6Mpps (64-byte packet size)
Jumbo Frame: 12KB
Input: 100 – 240V AC, 50/60Hz
Max. consumption: 7.83W (no PD)
PoE budget: 55W
PoE Mode A: Pins 1, 2, 3, and 6 for power
Over current protection
Short circuit protection
0° – 40° C (32° – 104° F)
Max. 90% non-condensing
160 x 110 x 25mm (6.29 x 4.33 x 0.98 in.)
0.9kg (2 lbs.)
Quick Installation Guide
Power Brick (55V, 1.3A)
Power Cord (1.5m /4.9 ft.)
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.